JVC LYT0216-001B specifications 10 EN, Indoor Use, Using The Power Pack, Attach to Camcorder

10EN

Indoor Use

GETTINGSTARTED(Cont.)

When using the camcorder indoors, you can use the AC Power Adapter/Charger instead of a battery.

To AC outlet	Power cord
		Connector is
		under the cover
		DC-IN
		AC Power
Power lamp		Adapter/Charger
When power is		Core
supplied, the
		Filter
power lamp lights.
	To DC OUT jack	DC cord

1 SUPPLY POWER TO ADAPTER Plug the AC Power Adapter/Charger’s power cord in to an AC outlet.

2 SUPPLY POWER TO CAMCORDER Connect the AC Power Adapter/Charger to the camcorder.

Using The Power Pack

NOTE:

When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.

For extended use, prepare the provided Power Pack, which can be loaded with one battery pack. This Power Pack can be used together with the battery installed in the camcorder.

Connector	Battery cover
Screw	Knob

Mark

Battery

Screw head

INSERT CHARGED BATTERY
1 Open the battery cover while pressing the
knob and insert the	end of the battery

first. Close the battery cover.

2 ATTACH TO CAMCORDER

Align the connector and screw on the Power Pack while inserting the camcorder connector. Turn the spring-loaded screw head at the Power Pack's bottom inward and turn it clockwise to attach.

•To detach the Power Pack, turn the screw counterclockwise.

NOTES:

●When the battery remaining power indicator

appears as , that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.

●Each time you start shooting, the camcorder chooses the battery pack that has more remaining power, and uses that as the power supply. That means both battery packs will be exhausted at roughly the same time.