JVC LYT1528-001B, 0206ASR-NF-VM manual Read This First

Page 2

2 EN

Read This First!

Before recording important video, be sure to make a trial recording.

Play back your trial recording to make sure the video and audio have been recorded properly.

We recommend cleaning your video heads before

use.

If you haven’t used your

camcorder for awhile, the heads may be dirty. We recommend periodically cleaning the video heads with a cleaning cassette (optional).

Be sure to store your cassette tapes and camcorder in the proper environment.

Video heads can become dirty more easily if your cassette tapes and camcorder are stored in a dusty area. Cassette tapes should be removed from the camcorder and stored in cassette cases. Store the camcorder in a bag or other container.

Use SP (Standard) mode for important video recordings.

LP (Long Play) mode lets you record 50% more video than SP (Standard) mode, but you may experience mosaic-like noise during playback depending on the tape characteristics and the usage environment.

So, for important recordings, we recommend using SP mode.

For safety and reliability.

It is recommended only genuine JVC batteries and accessories are used in this camcorder.

This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN-VF707U/ VF714U/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

This camcorder is designed exclusively for the digital video cassette, SD Memory Card and

MultiMediaCard. Only cassettes marked “

and memory cards marked “ ” or

” can be used with this unit.

Remember that this camcorder is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

DO NOT leave the unit

-in place of over 50°C (122°F)

-in place where humidity is extremely low (below 35%) or extremely high (80%).

-in direct sunlight.

-in a closed car in summer.

-near a heater.

The LCD monitor is made with high-precision technology. However, black spots or bright spots of light (red, green or blue) may appear constantly on the LCD monitor. These spots are not recorded on the tape. This is not due to any defect of the unit. (Effective dots: more than 99.99%)

Do not leave the battery pack attached when the camcorder is not in use and check the unit regularly whether it is working or not.

Image 2
Contents For Customer Use Digital Still Camera D.S.C. RecordingDear Customer Model No Serial NoRead This First Safety Precautions Important Safety Instructions Use SP Standard mode for important video recordings Before Using This CamcorderWe recommend cleaning your video heads before use It is recommended that you use JVC brand cassette tapesBacklight Compensation Data BatteryWipe/Fader Effects LED LightReferences Index EN Getting StartedControls ÇIndicatorsConnectors ÉOther PartsDEC Sound 12 B I T11 13 AM 1555DE C During Video PlaybackDuring D.S.C. Playback 12 BProvided Accessories How To Attach The Shoulder StrapCharging The Battery Pack PowerHow To Attach The Core Filter Close the core filter until it clicks shutData Battery System Maximum continuous recording timeAuto/Manual Mode Operation ModeUsing AC Power About BatteriesDate/Time Settings InformationViewfinder Adjustment Grip AdjustmentBrightness Adjustment Of The Display Adjust the velcro stripTo protect valuable recordings CardLoading/Unloading a Memory To protect valuable files available only for SD Memory CardLCD Monitor And Viewfinder Basic RecordingTape Remaining Time Zoom EN Video RecordingTime Code Zoom OutStill Playback To control the speaker volumeQuick Review EN Video Playback Blank SearchVideo Playback EN If using a VCR , go to stepConnections To a TV Or VCR Beam Effective Area indoor use Installing The BatteryControl Buttons And FunctionsFrame-By-Frame Playback Slow-Motion PlaybackPlayback Special Effects Playback ZoomApproximate Number of Storable Images EN D.S.C. RecordingBasic Shooting D.S.C. Snapshot Auto Playback Of Images Normal Playback Of ImagesIndex Playback Of Files Press 4 Or 2 to Move the frame to Desired file Press SET.Protecting Files Resetting The File NameEN Additional Features for D.S.C To Remove ProtectionTo delete the currently displayed file Setting Print Information Dpof SettingDeleting Files To delete all files stored in the memory cardTo Reset The Number Of Prints Initializing a Memory CardFor Video Playback Menu Video Playback MenuFor Video and D.S.C. Recording Menus EN Menus for Detailed Adjustment Recording MenusAuto Fine / Standard English / FrançaisEspañol / Português OFF / LCD / LCD/TV Sound Mode and NarrationPlayback Menus OFF / onLive Slow EN Features for RecordingLED Light Manual Focus Motor Drive ModeNight-Alive Snapshot Record Still Image On TapeTo return to automatic exposure control Operation Mode Video MemoryExposure Control To return to automatic iris controlSpot Exposure Control White Balance AdjustmentBacklight Compensation To REC To deactivate the selected effectProgram AE, Effects And Shutter Features for Recording ENEffects EN Editing To use this camcorder as a playerTo use this camcorder as a recorder Digital DubbingDubbing To Or From a Video Unit Using USB cable B Using DV cable Using USB cableUsing DV cable Memory card to a PCEditing EN Audio DubbingInsert Editing To hear the dubbed sound during playbackAdvanced features EN TroubleshootingPower Video and D.S.C. RecordingOther problems DeletedRemaining power level High Exhausted Appears when the tape ends during recording or playbackDisplays the battery remaining power To SAVE.  pg Memory card when you attempt memory cardMemory card once and insert it again. Repeat Cleaning The Camcorder EN User MaintenanceAC Adapter Battery PacksUsing Household AC Plug Adapter CassettesLCD Monitor EN CautionsMemory Cards Main UnitAbout moisture condensation How To Handle a CD-ROMDeclaration of Conformity Serious malfunctioningEN Specifications CamcorderRecording Capacity Dpof SettingTerms EN 46-49GR-D390U