JVC LYT1528-001B Resetting The File Name, Protecting Files, EN Additional Features for D.S.C, Set

28 EN ADDITIONAL FEATURES FOR D.S.C.

		Resetting The File Name	To protect all files stored in the memory card
			4 Press 4 or 3 to select “PROT.ALL”, and press
By resetting the file name, a new folder will be			SET or 2. The PROTECT screen appears.
made. The new files you are going to make will			5 Press 4 or 3 to select “EXECUTE”, and
be stored in the new folder. It is convenient to			press SET.
separate the new files from previously made			● To cancel protection, select “RETURN”.
files.			NOTES:
1 Perform steps 1 – 3 in “Normal Playback Of
			● If the “ ” mark appears, the currently displayed
Images”. ( pg. 27)			file is protected.
2 Press MENU. The Menu Screen appears.			● When the memory card is initialized or corrupted,
			even protected files are deleted. If you do not want
3 Press 4, 3, 1 or 2 to select “NO. RESET”,
			to lose important files, transfer them to a PC and
and press SET. The NO. RESET screen			save them.
appears.			To Remove Protection
4 Press 4 or 3 to select “EXECUTE”, and
press SET. The new folder (such as			Before doing the following, perform steps 1 – 3
“101JVCGR”) will be made and the file name of			in “Protecting Files”.
the next shot starts from DVC00001.			To remove protection from the currently
NOTE:
			displayed file
If the file name reaches DVC09999, a new folder			4 Press 4 or 3 to select “CURRENT”, and
(such as “101JVCGR”) will be made and the file
			press SET or 2. The PROTECT screen appears.
name will start again from DVC00001.
			5 Press 1 or 2 to select the desired file.
		Protecting Files	6 Press 4 or 3 to select “EXECUTE”, and
			press SET.
The Protect mode helps prevent the accidental
			● To cancel selection, select “RETURN”.
erasure of files.			● Repeat steps 5 and 6 for all files you want to
1 Perform steps 1 – 3 in “Normal Playback Of			remove protection.
			To remove protection from all files stored in
Images”. ( pg. 27)
			the memory card
2 Press MENU. The Menu Screen appears.
			4 Press 4 or 3 to select “CANC.ALL”, and
3 Press 4, 3, 1 or 2 to select “PROTECT”, and
			press SET or 2. The PROTECT screen appears.
press SET. The PROTECT Menu appears.			5 Press 4 or 3 to select “EXECUTE”, and
To protect the currently displayed file
			press SET.
4 Press 4 or 3 to select			● To cancel selection, select “RETURN”.
“CURRENT”, and press
SET or 2. The PROTECT
screen appears.
5 Press 1 or 2 to select
the desired file.
6 Press 4 or 3 to select
“EXECUTE”, and press
SET.
● To cancel protection,
	select “RETURN”.
● Repeat steps 5 and 6 for
	all files you want to
	protect.