34 EN MENUS FOR DETAILED ADJUSTMENT
DISPLAY
●The following menu settings can be changed only when the Power Switch is set to “REC”.
●The DISPLAY settings except “BRIGHT” and “LANGUAGE” are effective only for shooting.
[ ] =
BRIGHT
pg. 17, “Brightness Adjustment Of The Display”
CLOCK ADJ.
pg. 16, “Date/Time Settings”
LANGUAGE
/ 
/ 
/ [ENGLISH] / FRANÇAIS /
ESPAÑOL / PORTUGUÊS
The language setting can be changed. ( pg. 16)
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control. ( pg. 23, 42)
ON SCREEN
LCD: Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.
[LCD/TV]: Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.
TIME CODE
[OFF]: Time code is not displayed.
ON: Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( pg. 20)
DEMO MODE
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Wipe/Fader and Effects, etc., and can be used to confirm how these functions operate.
Demonstration starts in the following cases:
●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “REC”.
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
DSC
[ ] =
QUALITY
[FINE] / STANDARD
The Picture Quality mode can be selected to best match your needs. Two Picture Quality
modes are available: FINE ( 
) and STANDARD ( 
) (in order of quality).
NOTE:
The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used. ( pg. 26)
REC SELECT
[ 
(TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.
/
(TAPE/CARD): When Snapshot recording is performed with the VIDEO/ MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels).