JVC 0206ASR-NF-VM manual Backlight Compensation, White Balance Adjustment, Spot Exposure Control

							FEATURES FOR RECORDING	EN 39
	Backlight Compensation
					NOTES:
					● You cannot use the Spot Exposure Control at the
Backlight compensation brightens the subject						same time with following functions.
quickly.						• “16:9” in “WIDE MODE” ( pg. 36)
						• “STROBE” in EFFECT ( pg. 41)
With simple operation, backlight compensation
						• Digital Zoom ( pg. 20)
feature brightens the dark subject portion by
					● Depending on the shooting location and condition,
increasing the exposure.
						optimum result may not be attained.
1 Set the Power Switch to “REC”.
2 Press BACKLIGHT so that the Backlight						White Balance Adjustment
Compensation indicator “		” appears.
					The white balance refers to the correctness of
To cancel Backlight Compensation
					color reproduction under various lighting. If the
Press BACKLIGHT twice so that the “				”
					white balance is correct, all other colors will be
indicator disappears.
					accurately reproduced.
NOTE:
					The white balance is usually adjusted
Using Backlight Compensation may cause the light					automatically. However, more advanced
around the subject to become too bright and the					camcorder operators control this function
subject to become white.					manually to achieve a more professional color/
	Spot Exposure Control				tint reproduction.
					To change the setting
					Set “W. BALANCE” to the desired mode.
Selection of a spot metering area enables more
					( pg. 31)
precise exposure compensation. You can select					● The selected mode indicator except “AUTO”
one of the three metering areas on the LCD						appears.
monitor/viewfinder.					[AUTO]: White balance is adjusted
1 Set the Power Switch to “REC”.
					automatically.
							MWB: Adjust the white balance manually
2 Set the recording mode to “M”. ( pg. 15)
3 Press BACKLIGHT twice so that the Spot					when shooting under various types of lighting.
					( “Manual White Balance Adjustment”, pg. 40)
Exposure Control indicator “			” appears.				FINE: Outdoors on a sunny day.
● A spot metering area frame appears at the
							CLOUD: Outdoors on a cloudy day.
	center of the LCD monitor/viewfinder.
					[ ] = Factory-preset
4 Press 2 or 1 to select the desired spot
					To return to automatic white balance
metering area frame.
					Set “W. BALANCE” to “AUTO”. ( pg. 31)
5 Press SET.

●Spot Exposure Control is engaged.

●Exposure is adjusted to make the brightness of the selected area most appropriate.

To lock the iris

After step 4, press and hold SET over 2 seconds. The “” indication appears and the iris is locked.

To cancel Spot Exposure Control

Press BACKLIGHT once so that the “ ” indicator disappears.

ADVANCED FEATURES