JVC LYT1528-001B, 0206ASR-NF-VM manual Initializing a Memory Card, To Reset The Number Of Prints

30 EN	ADDITIONAL FEATURES FOR D.S.C.
To Print By Selecting Still Images And		To Reset The Number Of Prints
Number Of Prints
		1 Perform steps 1 – 3 in “To Print All Still
1 Perform steps 1 – 3 in “To Print All Still
		Images (One Print For Each)”. ( pg. 29)
Images (One Print For Each)”. ( pg. 29)		2 Press 4 or 3 to select “RESET”, and press
2 Press 4 or 3 to select		SET. The DPOF screen appears.
“CURRENT”, and press		3 Press 4 or 3 to select “EXECUTE”, and
SET or 2. The DPOF		press SET. The normal playback screen
screen appears.		appears.
3 Press 1 or 2 to select		● To cancel selection, select “RETURN”.
		● The number of prints is reset to 0 for all still
the desired file.
			images.
4 Press 4 or 3 to select the number indication
		CAUTION:
(00), and press SET.
		While performing the above, never disconnect
5 Select the number of
		power, as this may cause the memory card to be
prints by pressing 3 to		corrupted.
increase the number, or 4			Initializing A Memory Card
to decrease the number,
and press SET.
● Repeat steps 3 through 5		You can initialize a memory card any time.
for the desired number of		After initializing, all files and data stored in the
prints.
		memory card, including those which have been
● The number of prints can be set up to 15.
		protected, are cleared.
● To correct the number of prints, select the image
		1 Set the VIDEO/MEMORY Switch to
again and change the number.
6 Press 4 or 3 to select		“MEMORY”.
“RETURN”, and press		2 Set the Power Switch to “PLAY” while
SET. The “SAVE?”		pressing down the Lock Button located on the
appears.
		switch.
● If you did not change any		3 Press MENU. The Menu Screen appears.
settings in step 3 through
5, the DPOF Menu		4 Press 4, 3, 1 or 2 to
reappears.		select “FORMAT”, and
7 Press 4 or 3 to select “EXECUTE” to save		press SET. The FORMAT
the setting you have just made, and press SET.		screen appears.
● To cancel selection, select “CANCEL”.		5 Press 4 or 3 to select
		“EXECUTE”, and press
		SET. The memory card is
		initialized.
		● When initialization is finished, “NO IMAGES
			STORED” appears.
		● To cancel initialization, select “RETURN”.
		CAUTION:
		Do not perform any other operation (such as
		turning off the camcorder) during initialization.
		Also, be sure to use the provided AC Adapter, as
		the memory card may be corrupted if the battery
		becomes exhausted during initialization. If the
		memory card becomes corrupted, initialize it.