|
|
|
| TROUBLESHOOTING | EN 49 | ||
|
|
|
|
| |||
|
|
|
|
|
| ||
INSERT ERROR! |
| NO IMAGES STORED |
| ||||
<CANNOT EDIT ON A LP RECORDED |
| Appears if there are no image files stored in the | |||||
TAPE> |
| ||||||
| memory card when you attempt memory card | ||||||
<CHECK TAPE’S ERASE PROTECTION |
| ||||||
| playback. | ||||||
TAB> |
| ||||||
|
|
|
| ||||
<CANNOT EDIT ON A BLANK PORTION> |
| CARD ERROR! |
| ||||
● Appears if Insert Editing is attempted on a |
| Appears when the camcorder does not | |||||
tape recorded in the LP mode. ( pg. 45) |
| recognize the loaded memory card. Remove the | |||||
● Appears if INSERT ( |
| ) on the remote control |
| memory card once and insert it again. Repeat | |||
| |||||||
| |||||||
is pressed when the erase protection tab is set |
| these procedures until no indication appears. If | |||||
to “SAVE”. ( pg. 45) |
| the indication still appears, the memory card is | |||||
● Appears if Insert Editing is attempted on a |
| corrupted. | |||||
blank portion of a tape. ( pg. 45) |
|
|
|
| |||
|
|
|
| CHECK CARD’S WRITE PROTECTION |
| ||
MEMORY IS FULL | |||||||
| SWITCH |
| |||||
|
|
|
|
|
|
| |
Appears when the memory card’s memory is full and shooting is not possible.
HDV
Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder.
?
Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder.
COPY PROTECTED
Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.
MEMORY CARD!
Appears if there is no memory card loaded when the SNAPSHOT Button is pressed while the Power Switch is set to “REC” and the VIDEO/ MEMORY Switch is set to “MEMORY”.
PLEASE FORMAT
Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialized. Initialize the memory card.
( pg. 30)
Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the “LOCK” position.
UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY OR DC PLUG
The error indications (01, 02 or 06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE
The error indications (03 or 04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re- insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
REFERENCES