Panasonic AJ-HD1700 manual Interface

Setup menus

<INTERFACE>

No./Item

Description of setting

200

For selecting whether to operate two or more

VTRs in synchronization.

PARA RUN

0000

DIS

: The

VTRs are not operated in

synchronization.

0001

ENA

:

The

VTRs

are operated in

synchronization.

<Note>

To operate the VTRs in synchronization, set all the

VTRs to 1 (ENA). (Refer to pages 14 and 19.)

202

For

setting what

ID information is to be

returned to the controller.

ID SEL

0000

OTHER

0001

DVCPRO

0002

ORIG

<Notes>

•

For 0 (OTHER), the ID information of VTRs other than

DVCPRO models is set.

•

Select 2 (ORIG) only when the VTR is connected to a

Panasonic controller (such as the

AJ-A900,

an

optional accessory).

•

Select 1 (DVCPRO) or 2 (ORIG) if the 23/24 Hz mode

has been selected by system menu item No.25

(SYSTEM FREQ).

204

For selecting whether the RS-232C connector

is to function.

RS232C SEL

0000

OFF

:

The

RS-232C

connector

does

not function.

0001

ON

: The RS-232C connector functions.

205

For setting the RS-232C data transfer speed

(baud rate).

BAUD RATE

0000

300

0001

600

0002

1200

0003

2400

0004

4800

0005

9600

206

For setting the RS-232C data length.

(Unit: bits)

DATA

0000

7

LENGTH

0001

8

207

For setting the number of RS-232C stop bits.

(Unit: bits)

STOP BIT

0000

1

0001

2

208

For setting whether the RS-232C parity bit is

to be used and, if it is used, whether even or

PARITY

odd parity is to apply.

0000

NON

:

The parity bit is not used.

0001

ODD

:

The parity bit is used with an odd parity.

0002

EVEN

:

The parity bit is used with an even parity.

The underlining (__) denotes the factory setting mode.

No./Item			Description of setting
209	For setting whether or not to return the ACK
	code when a command is received from RS-
RETURN ACK	232C.
	0000		OFF	:	The ACK code is not returned.
		0001	ON	:	The ACK code is returned.
212	For selecting the remote control connector
	for controlling the slave machine when this
MASTER	VTR is to be used as the master machine for
PORT	deck-to-deck operations.
		0001	IN/OUT	:	The IN/OUT connector is used.
	0001		OUT	:	The OUT connector is used.
	<Note>
	This setting takes effect only when the 9P button has
	been set to LOCAL (LED off).

87