Panasonic AJ-HD1700 manual Sch Sd, System, Freq, Menu Lock

System menus

No./Item

Description of setting

18

For adjusting the SCH phase.

When the

SHIFTbutton is pressed, the display transfers to

SCH (SD)*

DW

the

submenu

screen; press

the

buttonSHIFTagain

to

return the display from the submenu screen.

Submenu screen

00

For adjusting the SCH phase in 90

o steps

(The SC phase changes, and the H phase remains

COARSE

unchanged.)

0000:

0

0001:

90

0002:

180

0003:

270

01

For adjusting the SCH phase over a total variable

range of more than

d45o.

FINE

j: To advance the phase.

i: To delay the phase.

(The SC phase changes, and the H phase remains

unchanged.)

0000

j32

:

:

0032

0

:

:

0064

32

20

For adjusting the audio output phase in relation to

the video output phase in 20.8

¨s steps.

AV PHASE

j:

The audio output phase is advanced in relation to

the video output phase.

i:

The audio output phase is delayed in relation to

the video output phase.

0000

j100

:

:

0100

0

:

:

0200

100

25

For selecting the system frequency.

0: The 59.94 Hz or 60 Hz system frequency is selected.

SYSTEM

1: The 50 Hz system frequency is selected.

FREQ*

2: The 23.98 Hz or 24 Hz system frequency is selected.

3: The 25 Hz system frequency is selected.

However, with SD SDI and video output signals, there

is a delay of approximately one field compared with

the HD SDI output.

4: The 25 Hz system frequency is selected.

However, HD SDI output is muted.

0003

59/60

0001*

50*

*

The

asterisk

denotes

the

0002

23/24

factory

setting

for

AJ-

0003

25 (HD)

HD1700E

0004

25 (SD)

59/60 Hz mode:

Status in which “0” (59/60) has been

selected

50 Hz mode:

Status in

which

“1”

(50)

has

been

selected

23/24 Hz mode:

Status in which “2” (23/24) has been

selected

25 Hz (HD) mode:

Status in which “3” (25 (HD)) has been

selected

25 Hz (SD) mode:

Status in which “4” (25(SD)) has been

selected

<Notes>

•

This setting remains unchanged even when the

factory setting operation is performed.

•

For

the steps to take to switch the system

frequency, refer to page 105.

No./Item				Description of setting
30	For selecting		whether to set or release the
	system file lock mode.
MENU LOCK		0000		OFF	:	Lock released (changes enabled)
	0001		ON		:	Lock set (changes prohibited)
	<Note>
	Even when “ON” is selected, the data will be overwritten
	when the system file has been set to LOAD from the IC
	card.

*System switching

• Some of the system menu and setup menu items each have

different settings for different operation modes (59/60 Hz, 50 Hz, 23/24 Hz and 25 Hz (HD or SD)). These settings are saved separately.

(This concerns those items whose settings were described for each operation mode on the system menu and setup menu tables.)

•For further details, refer to “How to switch the system frequency” on page 105.

•Since this VTR becomes a playback-only unit when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected, the functions relating to EE, recording and editing are all

set to the inhibited status. Neither is it possible to select CTL in such a case.

(The related menus and function buttons are not

displayed, and operation is prohibited.)

For the instant when the tape begins to run at the 1k speed such as when it starts playing from the STOP

status, the image is disrupted and the sound is muted for several frames because the tape is being synchronized with the REF input.

The underlining (__) denotes the factory setting mode.

*DW: This is for SD outputs (during SD tape playback or down- conversion outputs).

80