Panasonic AJ-HD1700 manual Basic

Setup menus

<BASIC>

No./Item					Description of setting
000	For setting the preroll time.
P-ROLL TIME	Any time		from		0 to	30		seconds can be set in 1-
	second increments.
	0000				0s
	:					:
		0005			5s
	:					:
	0030				30s
	<Notes>
	• During automatic editing (PREVIEW or AUTO EDIT),
		no operations are performed if the preroll time is set
		to 0 seconds.
	• If the phases are to be synchronized between two
		decks for editing as per the setup menu item No.004
		(SYNCHRONIZE) setting, set the preroll time to at
		least 2 seconds.
001	For selecting				the	transport system buttons
	which can be operated on the front panel in
LOCAL ENA	the REMOTE mode.
	0000			DIS		: No buttons can be operated.
		0001		ST&EJ		:
		Only the STOP and EJECT buttons can be
		operated.
	0002			ENA		:
		All the buttons except for the RECORDER and
		PLAYER buttons can be operated.
	<Note>
	The following buttons and dials function at all times
	regardless of this setting:
	Audio input/output level control dials, audio channel
	selector buttons, number keys, function buttons, direct
	menu button, ASSEM button, INSERT button, ADJ dial,
	headphone volume control dial, MONITOR SELECT
	button, METER (FULL/FINE) selector switch, REMOTE
	button.
002* 1	For selecting the 12- or 24-hour system for
	the CTL counter display.
TAPE TIMER		0000			d12h:			12-hour system display
	0001				24h :			24-hour system display
003	For selecting whether or not to display REMAIN
	(remaining tape time) on the superimposed
REMAIN SEL	display		of		the		HD SDI MONITOR, SD SDI
	MONITOR and VIDEO OUT3 connectors.
	0000			OFF		:
		The remaining tape time is not displayed.
		0001			2L :
		The remaining tape time is displayed on the
		second line.
	0002				1L	:
		The remaining tape time is displayed on the
		first line.
	0003		R/TTL			:
		The remaining tape time is displayed on the
		first line, and the total tape time is displayed on
		the second line.
	<Notes>
	• When setting 1 (2L) has been selected, the remaining
		tape time is not displayed if 0 (TIME) is selected as
		the setup menu item No.006 (DISPLAY SEL) setting.
	• When setting 3 (R/TTL) has been selected, the
		remaining tape time is not displayed if 0 (TIME) is
		selected as the setup menu item No.006 (DISPLAY
		SEL) setting.

No./Item							Description of setting
004* 1	For setting whether or not to synchronize the
	phases between two decks.
SYNCHRONIZE	0000					OFF		:
		The phases are not synchronized. The edit
		points will be off by several frames but editing
		will be commenced more promptly.
	0001						ON	:
		The phases					are synchronized.			Error-free
		editing can be performed.
005	For selecting whether or not to superimpose
	the		display of the time code or other data
SUPER	onto the HD SDI MONITOR, SD SDI MONITOR
	and VIDEO OUT3 connectors.
	0000					OFF		:
		The time code or other data is not displayed.
	0001						ON	:
		The time code or other data is displayed.
006	For		selecting				the time		code	and other
	displays to be superimposed onto the HD SDI
DISPLAY SEL	MONITOR, SD						SDI	MONITOR	and	VIDEO
	OUT3 connectors.
	0000				TIME			:
		Only the time is displayed.
	0001				T&STA			:
		The time and operation mode are displayed.
	0002				T&S&M			:
		The time, operation mode and mode are
		displayed.
	0003				T&RT			:
		The time and REC TIME are displayed.
	0004				T&YMD			:
		The time and REC DATE (year/month/day) are
		displayed.
	0005			T&MDY				:
		The time and REC DATE (month/day/year) are
		displayed.
	0006				T&DMY			:
		The time and REC DATE (day/month/year) are
		displayed.
	0007				T&UB			:
		Data and user’s bit are displayed.
		However, when UB has been selected with the
				(TC/CTL) on the HOME menu, the time
		F3
		code is displayed after the user								’s bit.
	0008			T&CTL				:
		Data and CTL data are displayed.
		However, when CTL has been selected with
		the				(TC/CTL) on the HOME menu, the time
					F3
		code is displayed after the CTL data.
	0009					T&T		:
		Data and time code are displayed.
										(See Notes on next page.)

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item.

The underlining (__) denotes the factory setting mode.

81