Panasonic AJ-HD1700 manual U/C, C Enh, HUE Style, Bk Lvl

Setup menus

<VIDEO>

(continued)

No./Item

Description of setting

2

For selecting the

HD

output

signal format

636*

during 480i tape (DVCPRO50, DVCPRO, DV or

480i >HD_

DVCAM) playback.

(See table below.)

OUT

0000

1080i

0001

720p

0002

---------

2

For selecting the

SD

output

signal

format

637*

during 480i tape (DVCPRO50, DVCPRO, DV or

480i >SD_

DVCAM) playback.

(See table below.)

OUT

0000

480i

0001

480i

0002

480p

Output connectors

HD SDI OUT

SD SDI OUT

VIDEO OUT

0000

1080i (up-

480i

480i

converted output)

(no conversion)

(no conversion)

0001

720p (up-

480i

480i

converted output)

(no conversion)

(no conversion)

0002

Muted

480p* (up-

480i

converted output)

(no conversion)

<Note>

During SD tape playback, the VTR cannot be operated in the 60

Hz mode.

1

For selecting the up-conversion picture frame

638*

when SD SDI input signals are supplied.

IN U/C

0000

FIT_V

:

Side panel mode

MODE

0001

FIT_H:

Top and bottom cut in vertical

direction

0002

FIT_HV

:

Stretch mode

1

For selecting the horizontal frequency band

639*

during

the up-conversion of

SD SDI

input

I U/C RESP H

signals.

0000

STD

0001

NARROW

640*1

For selecting the

vertical

frequency band

during

the up-conversion of

SD SDI

input

I U/C RESP V

signals.

0000

STD

0001

NARROW

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

*Setup menu item No.107 and INPUT CHECK do not function, and the same signal as this signal line is output.

<Note>

Setup menu items No.638, 639, 640, 641 and 642 do not function when the AJ-UC1700G optional board has not been installed.

The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output)

No./Item							Description of setting
2		For	accentuating the horizontal							contours
641*
		during up-conversion of SD SDI input signals.
I U/C ENH		0000				0dB
H		0001			i0.7dB
			0002			i1dB			<Note>
		0003			i1.2dB
		0004			i1.5dB				The numbers on the superimposed
		0005				i2dB			display are approximations only.
642*		For accentuating the vertical contours during
		up-conversion of SD SDI input signals.
I U/C ENH		0000				0dB
V		0001			i0.7dB
			0002			i1dB			<Note>
		0003			i1.2dB
		0004			i1.5dB				The numbers on the superimposed
		0005				i2dB			display are approximations only.
650		0000*		CMPNT*				:	Level adjustment mode for the
									component style
STYLE		0001		CMPST				:	Level adjustment mode for the
									composite style
		* The asterisk denotes the factory setting for
			AJ-HD1700E.
3		For selecting the rotational axis of the chroma
651*
		phase adjustment.
HUE STYLE		0000		Pb-Pr				:	The axis rotates in a perfect
(SD)* DW									circle on the SDI (component
									style) vectorscope.
		0001					U-V :		The axis rotates in a perfect
									circle on the analog (composite
									style) vectorscope.
653		For adjusting the Y level of the HD SDI output.
		(j¶ to			0 dB			to	i3 dB)
Y LVL (HD)*	UP	0000		0.0%
			:					:	<Note>
			1000	100.0%					This setting takes effect when
									“CMPNT” has been selected as the
			:					:
		1413				141.3% setup menu item No.650 setting.
654		For	adjusting					the	PB level of	the HD SDI
		output.
Pb LVL		(j¶ to			0 dB			to	i3 dB)
(HD)* UP		0000		0.0%
			:					:	<Note>
			1000	100.0%					This setting takes effect when
									“CMPNT” has been selected as the
			:					:
		1413				141.3% setup menu item No.650 setting.
655		For	adjusting					the	PB level of	the HD SDI
		output.
Pr LVL (HD)*	UP	(j¶ to			0 dB			to	i3 dB)
		0000		0.0%					<Note>
			:					:
			1000	100.0%					This setting takes effect when
									“CMPNT” has been selected as the
			:					:
		1413				141.3% setup menu item No.650 setting.
656		For adjusting the black level of the HD SDI
		output.
BK LVL			50		j10.0%				<Note>
(HD)* UP			:					:
			150				0.0%		This setting takes effect when
			:					:	“CMPNT” has been selected as the
			250		i10.0%				setup menu item No.650 setting.

95