Panasonic AJ-HD1700 manual Operation

Setup menus

<OPERATION>

No./Item

Description of setting

100

For selecting the direct search dial operation.

0000

DIAL

:

SEARCH ENA

Direct search dial operations are performed.

0001

KEY

:

Operation

does

not transfer

to the search

mode unless the SHTL, JOG or VAR button is

pressed.

101

For selecting the maximum speed of shuttle

operations.

SHTL MAX

0000

k9.8: k9.8 times normal speed

0001

k16: k16 times normal speed

0002

k32: k32 times normal speed

<Note>

Depending on the tape format, the actual tape running

speed differs slightly from what is indicated by the

superimposed display

.

102

For

setting

the

maximum

speed

of

fast

forward and rewind operations.

FF. REW MAX

0000

k16: k16 times normal speed

0001

k32: k32 times normal speed

0002

k50 : k50 times normal speed

0003

k60: k60 times normal speed

0004

k100 : k100 times normal speed

<Note>

The maximum speed is automatically limited to 50x for

the DVCPRO HD and DVCPRO50 format and to 32x for

the DV and DVCAM formats.

104

For

selecting

whether a warning is

to

be

displayed when the REF VIDEO signal has not

REF ALARM

been connected.

0000

OFF

: A warning is not displayed.

0001

ON

: A warning is displayed by the

blinking STOP lamp.

105*1

For selecting the VTR mode which is to be set

to the EE mode when “0 (EE)” is selected as

AUTO EE SEL

the

setup menu item No.140 (OUTPUT)

setting.

0000

S/F/R

:

The EE mode is established when the VTR is

in the STOP, FF or REW mode.

0001

STOP

:

The EE mode is established when the VTR is

in the STOP mode only.

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

No./Item					Description of setting
106	For	selecting			the video and audio output
	statuses in the EJECT mode.
EJECT EE SEL		0000			EE :
		The EE mode is always established regardless of
		the setup menu item No.140 (OUTPUT) setting.
	0001		BLACK			:
		When setup menu item No.140 (OUTPUT) is set to:
		“EE” :					The EE mode is established				.
		“TAPE”	:				The BLACK mode is established for
							the	video	signals,	and	the audio
							signals are muted.
	0002		GRAY			:
		When setup menu item No.140 (OUTPUT) is set to:
		“EE” :					The EE mode is established				.
		“TAPE”	:				The GRAY mode is established for the
							video signals, and the audio signals
							are muted.
	<Note>
	If 0 (EE) is selected while the 23/24 Hz or 25 Hz (HD or
	SD) mode has been selected as the system menu item
	No.25 (SYSTEM FREQ) setting, the VTR construes that
	1 (BLACK) has been selected.
1	For selecting what signals are to be									output
107*
	when the EE mode is established.
EE MODE SEL		0000	NORMAL				:
		Signals delayed by an amount equivalent to the time taken
		for the signals to be processed internally are output.
	0001		THRU			:
		The signals are not processed internally but output in their
		original form with no delay.
	<Note>
	The internal operation forcibly sets “NORMAL” when an
	editing mode is				selected or when SDTI is selected
	during video input signal selection.
108	For	setting the				play startup			time in	1-frame
	increments.
PLAY DELAY		0000				0
		:				:
	0015					15
1	For selecting whether to engage playback framing
109*
	lock in 4-field increments or in 2-field increments.
CAP. LOCK	<59/60Hz>								<50Hz>
		0000					2F		0000		2F
	0001					4F		0001			4F
									0002		8F
110	For	selecting			whether the tape is to be
	automatically wound back to its beginning
AUTO REW	when the tape-end has been detected.
	0000				OFF	:		The tape stops when it reaches the
								tape-end.
	0001			ON		:		The tape is rewound to its beginning.
111*	For	selecting whether to						automatically		stop	the
	VTR when the counter value is at the “0” position
MEMORY	during CTL mode FF and REW operations.
STOP		0000			OFF		:	The VTR does not stop.
	0001			ON		:		The VTR is automatically stopped.
	<Notes>
	• Either the stop or still picture (SHTL STILL or VAR
		STILL) mode, whichever has been set using setup
		menu	item		No.307 (AFTER CUE-UP), is
		established when the VTR is stopped.
	• If both the AUTO REW function and MEMORY
		function have been selected at the same time, the
		AUTO REW operation takes priority.

84