Panasonic AJ-HD1700 Eject Lamp, SP Mode, Rota Mode, KEY Beep, Alarm Beep, Output, Volume, Casstt

Setup menus

<OPERATION>

(continued)

No./Item

Description of setting

116

For selecting whether the EJECT lamp is to remain

lighted or go off after the cassette tape has been

EJECT LAMP

ejected.

0000

MODE1

:

The EJECT lamp remains lighted.

0001

MODE2

:

The EJECT lamp goes off.

1

For

selecting

whether

to

allow

or

inhibit

118*

recording on a tape which has been written

SP MODE

by a format other than DVCPRO HD-LP.

INH

0000

OFF

:

Recording on the cassette tape is allowed.

0001

ON

:

Recording on the cassette tape is inhibited.

<Notes>

• When 0 (OFF) has been selected, whether recording

on

the cassette tape is allowed or inhibited is

determined by the setup menu item No.113 (REC

INH) setting.

• The

recording

format is

determined

by

the

setup

menu item No.020 (SYS FORMAT) setting.

131

For selecting what cue point operation is to

be performed when the multi cue function has

PAGE MODE

been set to ON.

0000

MANU

:

Operation is confined within the selected page,

and 6 cue points can be registered.

0001

AUTO

:

When the page whose cue points are being

registered

becomes

full,

operation

is

automatically transferred to the next page, and

registration is continued. A total of 60 cue

points on up to 10 pages can be registered.

132

For

selecting whether to perform the

registration operation if all the cue

points

ROTA MODE

have already been registered when the multi

cue function has been set to ON

.

0000

OFF

:

No further cue points are registered.

0001

ON

:

The registration operation is continued. If “MANU”

has been selected as the setup menu item No.131

(PAGE MODE)

setting, the

next

cue

point

is

registered at

CUE

¢1 on the page concerned; if

“AUTO” has been selected, it is registered at CUE01.

133

For

setting the volume

of the

sound

heard

when the keys are touched.

KEY BEEP

0000

OFF

0001

LOW

0002

HIGH

134

For setting the volume of the alarm tone.

0000

OFF

ALARM BEEP

0001

LOW

0002

HIGH

<Note>

If the fan motor has shut down, the alarm tone is sounded

at the HIGH volume level regardless of this setting.

*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting.

The underlining (__) denotes the factory setting mode.

86

No./Item						Description of setting
140*1	For selecting the output signals.
		0000						EE	:
OUTPUT	<In the STOP mode>:
		The input signals selected by setup menu items
		No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL)
		to No.724 (D IN SEL 78) are output.
	<During recording or editing>:
		The input signals selected by setup menu items
		No.600 (VIDEO IN SEL) and No.713 (CH1 IN SEL)
		to No.724 (D IN SEL 78) are output:
	0001				TAPE				:
	<In the STOP mode>
		The signals played back from the tape are output.
	<During recording or editing>:
		The simultaneous playback signals are output.
	<Note>
	In order to select the output signals during recording or
	editing, set setup menu item No.302 (CONFI EDIT).
141*	For setting what								is to be controlled by the
	audio volume controls on the front panel.
VOLUME	0000				REC				:
		The controls function as REC volume controls.
	0001					PB			:
		The controls function as PB volume controls.
		0002				AUTO			:
		Normally, the controls function as PB volume
		controls. However, during recording or in the
		EE/INPUT CHECK status, they automatically
		function as REC volume controls.
142*	For selecting the								conditions under which the
	AUDIO UNITY lamp on the front panel is to light.
AUDIO UNITY	0000					IN			:
		The lamp lights when all the audio input levels
		are set to the UNITY level.
	0001					OUT			:
		The	lamp lights							when all the audio output
		levels are set to the UNITY level.
		0002		IN/OUT					:
		The lamp lights when all the audio input and
		output levels are set to the UNITY level.
143	For setting whether the lighting of the tape
	mechanism is to be set to ON or remain OFF.
CASSTT	0000				OFF				:
LIGHT		The	mechanism does not light even when a
		cassette is inserted.
		0001					ON		:
		The mechanism lights when a cassette is inserted.
144	For switching the preset registration method
	for the time code.
TC INPUT		0000	NORMAL						:
		The time code is input starting with the left-
		most digit.
	0001					REV			:
		The time code is input from the high-order digit
		but is displayed from the right-most digit.
145	For selecting whether the LCD monitor display on
	the front panel is to be turned on or off.
FRONT LCD	0000				OFF				:
		The display is turned off.
		0001					ON		:
		The display is turned on or off in synchronization
		with the screen saver operation for the time code
		display area.