Panasonic AJ-HD1700 manual Menu, A02, On Load, Up VTR, Vtr

Setup menus

<MENU>

No./Item

Description of setting

A02

This VTR is

equipped with

VTR MEMORY

C

for storing the current settings (*

1) and VTR

P. ON LOAD

MEMORY

to

1

for

4backing

up VTR

MEMORY

.

TheC

data

of

a selected

VTR

MEMORY

to

1 can

be4 loaded into

VTR

MEMORY

and operationC

started on the

basis of this data when the power is turned

on.

0000

OFF

:

Operation is started using the

previous

settings.

0001

USER1

:

The

VTR

MEMORY

data 1is

loaded

and

operation started on the basis of this data.

0002

USER2

:

The

VTR

MEMORY

data 2is

loaded

and

operation started on the basis of this data.

0003

USER3

:

The

VTR

MEMORY

data 3is

loaded

and

operation started on the basis of this data.

0004

USER4

:

The

VTR

MEMORY

data 4is

loaded

and

operation started on the basis of this data.

*1: The term “settings” here denotes all the settings of the setup menus, what is registered in the PF1/PF2 menus, and the contents of some of the function buttons.

The underlining (__) denotes the factory setting mode.

<Connections with Dolby-E* components>

When the VTR is to be connected to a Dolby-E encoder/decoder for recording or playing back Dolby-E data, set the audio input and output levels to UNITY, and select the following setup menu item settings.

No.303 AUD EDIT IN = CUT	<Notes>
No.304 AUD EDIT OUT = CUT	•	Dolby-E data cannot be recorded or played back in
No.725 REC CH1 = CH1		the 60 Hz mode.
No.726 REC CH2 = CH2	•	Adjust the timing with the video signals to cover the
No.727 REC CH3 = CH3		time taken by the Dolby-E component for
No.728 REC CH4 = CH4		encoding/decoding outside the VTR.
No.729 REC CH5 = CH5	•	Set the bit depth of the Dolby-E encoder/decoder to
No.730 REC CH6 = CH6		16 bits.
No.731 REC CH7 = CH7	•	Noise will be output from the ANALOG AUDIO OUT
No.732 REC CH8 = CH8		connectors of the channels through	which the
No.734 PB FADE = CUT		Dolby-E data is passing.
No.758 JOG PROC = OFF	•	The audio level meter will deflect beyond the range
No.762 AUD RATE CON = OFF		of its markings for those channels through which
		the Dolby-E data is passing.
	•	Noise will be output when a tape on which Dolby-E
		data has been recorded is played back in the JOG
		or VAR mode.
	*	Dolby and the Double D symbol	Î are trademarks of
		Dolby Laboratories Licensing Corporation.

104