Panasonic WV-BP550 manual Mounting the Lens

Mounting the Lens

Caution:

Before you mount the lens, loosen the two screws on the ring, and rotate this ring clockwise until it stops. If the ring is not at the end, the inner glass or CCD image sensor may be damaged.

1.Mount the lens by turning it clockwise on the lens mount of the camera.

2.Connect the lens cable to the auto iris lens con- nector on the side of the camera.

Screws

1

2

Flange-back

Adjusting Ring

Caution for Mounting the Lens

The lens mount should be a C-mount or CS-mount (1”- 32UN) and the lens weight should be less than 450g (0.99 lbs). If the lens is heavier, both the lens and cam- era should be secured by using the supporter.

The protrusion at the rear of the lens should be as shown below:

C-mount: Less than 13 mm (1/2”)

CS-mount: Less than 8 mm (5/16”)

-11-