Panasonic WV-BP550 manual Specifications

Page 34

SPECIFICATIONS

Pick-up Device:

771 (H) x 492 (V) pixels, Interline Transfer CCD

Scanning Area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of 1/3” pick-up tube)

Scanning:

525 lines / 60 fields / 30 frames

Horizontal:

15.734 kHz

Vertical:

59.94 Hz

Synchronization:

Internal, Line-locked, External (VS) or

 

Multiplexed Vertical Drive (VD2) Selectable

Video Output:

1.0 V[p-p] EIA composite 75 Ω / BNC connector

Horizontal Resolution:

570 lines

Signal-to-Noise Ratio:

50 dB (AGC OFF, weight ON)

Dynamic Range:

40 dB

Minimum Illumination:

0.02 lx (0.002 footcandle) at F0.75 [Equivalent to 0.08 lx (0.008 footcandle)

 

at F1.4]

Gain Control:

Selectable AGC ON or OFF (SET UP MENU)

Aperture:

Set Variable (SET UP MENU)

Electronic Light Control:

Equivalent to continuous variable shutter speed between 1/60 s

 

and 1/10 000 s

Super D:

Selectable On or Off (SET UP MENU)

Electronic Shutter Speed:

Selectable 1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000,

 

1/10 000 s

Lens Mount:

Selectable C-mount or CS-mount

ALC Lens:

Selectable DC or Video

Ambient Operating Temperature:

−10°C - +50°C (14°F - 122°F)

Ambient Operating Humidity:

Less than 90%

-32-

Page 33 Page 35
Image 34
Page 33 Page 35
Contents WV-BP550/WV-BP554 Symbol, within an equilateral triangle, is Contents Features PrefaceDo not attempt to disassemble the camera PrecautionsClean the CCD faceplate with care Handle the camera with careMajor Operating Controls and Their Functions WV-BP554Gen-lock Termination Switch Hi-Z, G/L 75Ω Auto Iris Lens ConnectorFlange-back Adjusting Ring Power indicatorAlarm Output Terminal Alarm OUT/GND Video Output Connector Video OUTPower Cord Socket AC/DC Compatible Input Terminal DC 12V IN/AC 24VWV-BP550 120V AC 60Hz DC Power SupplyConnections WV-BP554 12V DC/24V ACAC Power Supply Recommended wire gauge sizes for 24V AC lineRG-6U Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the bottom Installation of CameraMounting from the top SET UP Camera Setup MenuMotion Detector Setup Operation All Reset OperationEditing the CAM SET UP Menu Opening the Setup MenuImportant Notice Editing the Special menu To edit the Camera ID Setting ProceduresCamera Identification Camera ID Setting To enter a blank space in the Camera IDTo erase all characters in the editing area Light Control Setting ALC/ELCTo return to the CAM SET UP menu To determine the display position of the Camera IDALC Mode with SUPER-D on Super Dynamic Function SUPER-DALC Mode with SUPER-D OFF and ELC Mode Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFF Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync Important NoticesVS Gen-lock Mode Extvs EntLine-lock Sync Mode LL Motion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveSpecial Menu Special Aperture Gain Setting AP GainPedestal Level Setting Pedestal Camera Picture Upside Down PositioningPrevention of Blooming and Smear Specifications Standard Accessories Optional AccessoriesVideo Imaging Systems Company Regional Offices
Top Page Image Contents