• Opening the Setup Menu
Press and hold down 
for a second or longer.
** CAM SET UP ** | Blinking | |||
CAMERA ID | OFF | ↵ |
| |
ALC/ELC | ALC | ↵ |
| |
SHUTTER |
|
| ||
AGC |
| ON |
|
|
SENS | UP | OFF |
|
|
SYNC |
| INT |
|
|
MOTION DET | OFF | ↵ |
| |
LENS | DRIVE | DC |
|
|
END | SET UP DISABLE |
| ||
** CAM SET UP **
CAMERA ID | OFF | ↵ |
ALC/ELC | ALC | ↵ |
SHUTTER |
| |
AGC | ON |
|
SENS UP | OFF |
|
SYNC | INT |
|
MOTION DET | OFF | ↵ |
LENS DRIVE | DC |
|
END 
SET UP DISABLE
The CAM SET UP menu appears on the monitor as shown above.
Check the current settings on the menu.
Refer to the sections below for a detailed description of menu items. If you decide not to make any changes after checking the current settings, move the cursor to
END at the start of the bottom line, and press 
to close the CAM SET UP menu and return to normal camera picture mode.
Note: If no button is pressed for 6 minutes while the CAM SET UP menu or any other setting menu is displayed, displaying the menu is automatically canceled and the mode returns to the normal cam- era picture.
• Editing the CAM SET UP Menu
Important Notice:
When the words SET UP DISABLE appear on the bottom line of the CAM SET UP menu, you cannot change the currently active settings. This is to pre- vent accidental changing of the settings.
To edit the CAM SET UP menu (change settings), use
and 
or 
and 
to move the cursor to SET UP DISABLE in the bottom line.
Press 
. SET UP DISABLE changes to SET UP ENABLE. Move the cursor to END, then to the item(s) you want to change.