Panasonic WV-BP550 manual Focus or FLANGE-BACK Adjustment

Page 14

FOCUS OR FLANGE-BACK ADJUSTMENT

The following adjustment should be made by qualified	3. Tighten the screws on the flange-back adjusting
service personnel or system installers.	ring.
1. Loosen the screws on the flange-back adjusting
ring.
Focus adjust for
CS-mount lens
Focus adjust for
C-mount lens
Flange-back
Adjusting Ring

Screws

2.Turn the flange-back adjusting ring to the desired position.

Caution: When the C-mount lens is mounted, do not rotate the ring counterclockwise by force after it stops. If the ring is rotated by force, the inner lens or CCD image sensor may be dam- aged.

-12-

Image 14

Contents WV-BP550/WV-BP554 Symbol, within an equilateral triangle, is Contents Features PrefaceDo not attempt to disassemble the camera PrecautionsClean the CCD faceplate with care Handle the camera with careMajor Operating Controls and Their Functions WV-BP554Gen-lock Termination Switch Hi-Z, G/L 75Ω Auto Iris Lens ConnectorFlange-back Adjusting Ring Power indicatorAlarm Output Terminal Alarm OUT/GND Video Output Connector Video OUTPower Cord Socket AC/DC Compatible Input Terminal DC 12V IN/AC 24VWV-BP550 120V AC 60Hz DC Power SupplyConnections WV-BP554 12V DC/24V ACAC Power Supply Recommended wire gauge sizes for 24V AC lineRG-6U Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Mounting from the top Installation of CameraMounting from the bottom SET UP Camera Setup MenuMotion Detector Setup Operation All Reset OperationImportant Notice Opening the Setup MenuEditing the CAM SET UP Menu Editing the Special menu To edit the Camera ID Setting ProceduresCamera Identification Camera ID Setting To enter a blank space in the Camera IDTo erase all characters in the editing area Light Control Setting ALC/ELCTo return to the CAM SET UP menu To determine the display position of the Camera IDALC Mode with SUPER-D on Super Dynamic Function SUPER-DALC Mode with SUPER-D OFF and ELC Mode Shutter Speed Setting Shutter Gain Control Setting AGC ON/OFF Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync Important NoticesVS Gen-lock Mode Extvs EntLine-lock Sync Mode LL Motion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveSpecial Menu Special Aperture Gain Setting AP GainPedestal Level Setting Pedestal Camera Picture Upside Down PositioningPrevention of Blooming and Smear Specifications Standard Accessories Optional AccessoriesVideo Imaging Systems Company Regional Offices