Panasonic WV-BP550 manual Video Output Connector Video OUT, Power Cord Socket

!3 Video Output Connector (VIDEO OUT)

This connector is used to connect with the VIDEO IN connector of the monitor.

!4 Power Cord Socket

This socket is used to connect the power cord (supplied as a standard accessory).

!5 Alarm Output Terminal (ALARM OUT/GND)

This terminal is used to connect to the ALARM INPUT connector (terminal) of an external equip- ment. When this camera detects motion, the alarm output signal is supplied to the connected external equipment.

(Open collector output: 16V DC 100mA max.)

!6 AC/DC Compatible Input Terminal (DC 12V IN/AC 24V IN)

This terminal is for connecting the 12 V DC or 24 V AC power supply cord.

Cautions:

1.Connect to 12V DC (10.5V-16V) or 24V AC (19.5V-28V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24V AC power source.

2.To prevent fire or electric shock hazard, use a UL listed wire VW-1, style 1007 cable for the Input Terminal.

-6-