Kenwood KDC-516S, KDC-57MR, KDC-V6017, KDC-X617 instruction manual Presetting Disc Names Dnps

Page 24

CD/External disc control features

English

Presetting Disc Names (DNPS)

Store the names of discs to be displayed when played.

1Play the disc whose name you want to preset.

NOTE

•This function is not available for disc changers that do not feature the Disc Name Preset function.

•The Disc Name Preset function cannot be used during the Magazine random play as well as while a disc title or track title is displayed.

2Press the NAME.S button for at least two seconds.

"NAME SET" is displayed and the disc name preset mode is entered.

The cursor blinks in the position where character input can be made.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

You can also move the cursor left or right by pressing the 4 or ¢ buttons, respectively, on the remote.

4Each press of the 38 button results in the type of characters that are to be entered changing between alphabet and numerals/symbols.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z

Numerals and symbols: 0~9 @ ” ‘ ` % & ∗ + - = , . / \ < > [ ]

Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl â ä ê ë î ï ô ö û ü ñ ç © Æ › fi

NOTE Direct Alphabet Input

(Function of remote with number/letter entry buttons)

If the disc changers that were manufactured and sold after 1997

(except for KDC-C560) are connected, you can directly input letters using the number/letter entry buttons on the remote. Example: Use the following table to enter the name "DANCE".

Character

Button to press

# Times pressed

 

 

 

“D”

#3

1

“A”

#2

1

“N”

#6

2

“C”

#2

3

 

 

 

“E”

#3

2

5Continue steps 3 and 4 until all the characters are chosen for the name.

NOTE

You can enter up to 12 characters for each name.

6Press either the NAME.S button on the main unit or the OK button on the remote.

The disc name is stored and the disc name preset mode is canceled.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

NOTE

•The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details.

Up to 30 CDs can be registered with this unit.

•Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too.

•If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes.

•Pressing the reset button erases the disc names stored in this unit, but does not erase the names stored in a disc changer.

— 24 —

Page 23 Page 25
Image 24
Page 23 Page 25
Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the CD Slot Cleaning the Faceplate TerminalsCleaning the Unit Lens FoggingCleaning CDs Handling Compact discsStoring CDs Checking New CDs for BurrsDo Not Load CD Accessories Removing the CDDo Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled SideGeneral features PowerSwitching Modes Volume AttenuatorLoudness Non-Fading OutputTheft Deterrent Faceplate Removing the FaceplateReattaching the Faceplate Hiding the control panelSpeaker & Woofer setting Switching the Preset Sound SettingSystem Q Audio control features Clock displayChanging the Clock Display Audio Control Setting Bass Center FrequencyBass Level Bass Quality FactorMiddle Center Frequency Treble LevelMiddle Level Middle Quality FactorPhase for Non-Fading Output Volume OffsetHigh-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear OutputTuner features TuningSelecting Tuning Mode TuningStation Preset Memory Canceling Direct Access TuningRecalling a Preset Station Auto Memory EntryStation Name Preset Snps Switching Display for TunerAssigning Names Changing the DisplayCD/External disc control features Playing Other Disc mode Playing CDsSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Track Scan Track / Disc RepeatRandom Play Text / Title Scroll To scroll automaticallyTo scroll manually Presetting Disc Names Dnps Disc Name Preset Play Dnpp To cancel Dnpp mode Press the Dnpp buttonRapid display forward / reverse Menu settings Canceling Direct Disc Search While It Is OperatingEnter the menu mode Ending the menu mode Press the Menu buttonMenu System Selecting function to setIf you press the Reset button or remove the battery Security CodeManual Time Adjustment Switching Graphic DisplayTouch Sensor Tone Selectable IlluminationVariable Illumination Color Setting Contrast AdjustmentDimmer Text Scroll In External disc control mode External Amp ControlBasic Operations of remote Loading and Replacing the BatteriesTuner features Basic operationsCD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitPage Troubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel Specifications FM tuner sectionAM tuner section Audio section CD player sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood
Top Page Image Contents