Kenwood KDC-V6017, KDC-516S Variable Illumination Color Setting, Contrast Adjustment, Dimmer

Page 30

Menu settings

English

Function of the KDC-V6017

Variable Illumination Color Setting

You can set the display to a desired color.

Display and setting:

1Select the display "Color" during the selecting function in the menu mode.

2To set a color manually:

Hold down on the 4 or ¢ button.

Pressing the ¢ button advances the color, and pressing the 4 button reverses it.

When the desirable color appears, release the button.

3To make the popular colors appear:

Press the preset button (#1-4) for the desired color. The buttons #1-4 is preset for the following four colors:

#1: White

#2: Red

#3: Blue

#4: Blue Green

4To switch colors depending on the situation: (Situational Mode)

Each time you press the #6 button, the mode switches as follows:

▼

Scan Mode

▼

SRC Mode

(Changing colors depending on the source being played)

▼

Time Mode

(Color changes every six hours)

▼

Situational Mode off

When Situational Mode is off, the original color setting resumes.

5To finely adjust blue: (Blue Adjust Mode)

Press the #3 button for at least two seconds to enter the

blue adjust mode.

The 4 and ¢ buttons are used to adjust the blue color tones, respectively.

Press the #3 button to end the blue adjust mode.

6To store the color setting in the memory: (color preset memory)

After adjusting the illumination colors, press the #5 button for two seconds to store the color setting in the memory. Pressing the #5 button again recalls the stored colors from the memory.

NOTE

The Blue Adjust mode setting cannot be stored in memory.

7Press the MENU button to end the Variable Illumination Color Setting mode.

Contrast Adjustment

This adjustment permits easy viewing of the display.

Display and setting: "Contrast 0" – "Contrast 10"

NOTE

The initial setting value is "5".

Dimmer

You can dim the display.

NOTE

The dimmer function is not available for units if the dimmer wire is not connected.

Display and setting:

"Dimmer ON" : The dimmer setting is on. (Default setting)

"Dimmer OFF" : The dimmer setting is off.

— 30 —

Image 30

Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the Unit Cleaning the CD SlotCleaning the Faceplate Terminals Lens FoggingStoring CDs Cleaning CDsHandling Compact discs Checking New CDs for BurrsDo Not Use Special Shape CDs Do Not Load CD AccessoriesRemoving the CD Do Not Use CDs with Sticker on the Labeled SideGeneral features PowerSwitching Modes Loudness VolumeAttenuator Non-Fading OutputReattaching the Faceplate Theft Deterrent FaceplateRemoving the Faceplate Hiding the control panelSpeaker & Woofer setting Switching the Preset Sound SettingSystem Q Audio control features Clock displayChanging the Clock Display Bass Level Audio Control SettingBass Center Frequency Bass Quality FactorMiddle Level Middle Center FrequencyTreble Level Middle Quality FactorHigh-pass Filter Frequency for Front Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Rear OutputSelecting Tuning Mode Tuner featuresTuning TuningRecalling a Preset Station Station Preset MemoryCanceling Direct Access Tuning Auto Memory EntryAssigning Names Station Name Preset SnpsSwitching Display for Tuner Changing the DisplayCD/External disc control features Playing Other Disc mode Playing CDsSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Track Scan Track / Disc RepeatRandom Play Text / Title Scroll To scroll automaticallyTo scroll manually Presetting Disc Names Dnps Disc Name Preset Play Dnpp To cancel Dnpp mode Press the Dnpp buttonRapid display forward / reverse Menu settings Canceling Direct Disc Search While It Is OperatingMenu System Enter the menu modeEnding the menu mode Press the Menu button Selecting function to setIf you press the Reset button or remove the battery Security CodeTouch Sensor Tone Manual Time AdjustmentSwitching Graphic Display Selectable IlluminationVariable Illumination Color Setting Contrast AdjustmentDimmer Text Scroll In External disc control mode External Amp ControlBasic Operations of remote Loading and Replacing the BatteriesTuner features Basic operationsCD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitPage Troubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel AM tuner section Audio section SpecificationsFM tuner section CD player sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood