Kenwood KDC-V6017, KDC-516S, KDC-57MR, KDC-X617 Removing the hard rubber frame, Removing the Unit

Page 38

		Installation
		■ Removing the hard rubber frame
	English	■ Removing the hard rubber frame
	English	1	Refer to the section “Theft deterrent faceplate (P. 10)” and
			then remove the faceplate.
		2	Engage the catch pins on the removal tool and remove the
			two locks on the upper level.
			two locks on the upper level.
			Push upward the frame and pull it forward as shown in the
			figure.

Lock

Catch

Accessory3

Removal tool

3When the upper level is removed, remove the lower two locations.

■Removing the Unit

1Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Accessory6

Catch facing up

Accessory3

Removal tool

4Push upward the removal

tool toward the top, and pull out the unit halfway whilst pressing towards the inside.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5 Pull the unit all the way out with your hands, being careful not to drop it.

NOTE

The frame can be removed from the bottom side in the same manner.

— 38 —

Image 38

Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the Unit Cleaning the CD SlotCleaning the Faceplate Terminals Lens FoggingStoring CDs Cleaning CDsHandling Compact discs Checking New CDs for BurrsDo Not Use Special Shape CDs Do Not Load CD AccessoriesRemoving the CD Do Not Use CDs with Sticker on the Labeled SideSwitching Modes General featuresPower Loudness VolumeAttenuator Non-Fading OutputReattaching the Faceplate Theft Deterrent FaceplateRemoving the Faceplate Hiding the control panelSystem Q Speaker & Woofer settingSwitching the Preset Sound Setting Changing the Clock Display Audio control featuresClock display Bass Level Audio Control SettingBass Center Frequency Bass Quality FactorMiddle Level Middle Center FrequencyTreble Level Middle Quality FactorHigh-pass Filter Frequency for Front Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Rear OutputSelecting Tuning Mode Tuner featuresTuning TuningRecalling a Preset Station Station Preset MemoryCanceling Direct Access Tuning Auto Memory EntryAssigning Names Station Name Preset SnpsSwitching Display for Tuner Changing the DisplayCD/External disc control features Playing Other Disc mode Playing CDsTrack Search Switching Display for DiscsFast Forwarding and Reversing Disc Play Random Play Track ScanTrack / Disc Repeat To scroll manually Text / Title ScrollTo scroll automatically Presetting Disc Names Dnps Rapid display forward / reverse Disc Name Preset Play DnppTo cancel Dnpp mode Press the Dnpp button Menu settings Canceling Direct Disc Search While It Is OperatingMenu System Enter the menu modeEnding the menu mode Press the Menu button Selecting function to setIf you press the Reset button or remove the battery Security CodeTouch Sensor Tone Manual Time AdjustmentSwitching Graphic Display Selectable IlluminationDimmer Variable Illumination Color SettingContrast Adjustment Text Scroll In External disc control mode External Amp ControlBasic Operations of remote Loading and Replacing the BatteriesTuner features Basic operationsCD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitPage Troubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel AM tuner section Audio section SpecificationsFM tuner section CD player sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood