Kenwood KDC-57MR, KDC-516S, KDC-V6017, KDC-X617 instruction manual Basic operations, Tuner features

Page 33

Basic operations

•VOLUME buttons

Press the + button to turn the volume up. Press the – button to turn the volume down.

•SRC button

Each time you press the SRC button, the mode switches as follows:

▼

Tuner mode

▼

CD mode

▼

External disc control mode 1

▼

External disc control mode 2 / AUX mode

▼

Standby mode

NOTE

•The mode switches to the next mode from any mode which cannot be used.

•The external disc control mode will differ depending on the unit that is connected.

•To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCA- S210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC- CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only).

During the AUX mode, "AUX" (or AUX-name display) will show in the display.

When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode.

•ATT button

Turns down the volume quickly. To return the volume to its original level, press the button again. Turning the volume up, or turning it all the way down deactivates the attenuator function.

Tuner features

•4/¢ (TUNE) buttons

Press the 4 button to make decreasing seeks (using the preset tuning mode).

Press the ¢ button to make increasing seeks (using the preset tuning mode).

Use to move the cursor left or right during station name input.

•AM/FM buttons

Press the AM button to select the AM band.

Press the FM button to select and switch between FM1, FM2, and FM3 bands.

During station name input, selects digits and symbols.

•DIRECT/OK button

During station name input, stores the already input data in memory and ends the input mode.

Enters and cancels the Direct access tuning mode.

•38 button

Selects the type of characters at the time of entering the station name.

•Number/letter entry buttons (KDC-X617 only) Press buttons #1-6 to recall preset stations.

Use to enter letters (alphabetical) during station name preset. Use to enter frequency of the desired station during Direct access tuning mode.

— 33 —

Image 33

Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsCleaning the Faceplate Terminals Cleaning the CD SlotCleaning the Unit Lens FoggingHandling Compact discs Cleaning CDsStoring CDs Checking New CDs for BurrsRemoving the CD Do Not Load CD AccessoriesDo Not Use Special Shape CDs Do Not Use CDs with Sticker on the Labeled SideGeneral features PowerSwitching Modes Attenuator VolumeLoudness Non-Fading OutputRemoving the Faceplate Theft Deterrent FaceplateReattaching the Faceplate Hiding the control panelSpeaker & Woofer setting Switching the Preset Sound SettingSystem Q Audio control features Clock displayChanging the Clock Display Bass Center Frequency Audio Control SettingBass Level Bass Quality FactorTreble Level Middle Center FrequencyMiddle Level Middle Quality FactorVolume Offset Phase for Non-Fading OutputHigh-pass Filter Frequency for Front Output High-pass Filter Frequency for Rear OutputTuning Tuner featuresSelecting Tuning Mode TuningCanceling Direct Access Tuning Station Preset MemoryRecalling a Preset Station Auto Memory EntrySwitching Display for Tuner Station Name Preset SnpsAssigning Names Changing the DisplayCD/External disc control features Playing CDs Playing Other Disc modeSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Track Scan Track / Disc RepeatRandom Play Text / Title Scroll To scroll automaticallyTo scroll manually Presetting Disc Names Dnps Disc Name Preset Play Dnpp To cancel Dnpp mode Press the Dnpp buttonRapid display forward / reverse Canceling Direct Disc Search While It Is Operating Menu settingsEnding the menu mode Press the Menu button Enter the menu modeMenu System Selecting function to setSecurity Code If you press the Reset button or remove the batterySwitching Graphic Display Manual Time AdjustmentTouch Sensor Tone Selectable IlluminationVariable Illumination Color Setting Contrast AdjustmentDimmer External Amp Control Text Scroll In External disc control modeLoading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner featuresCD/External disc control features Installation Procedure AccessoriesACC Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber framePage Problem Possible Cause Solution Troubleshooting GuideProblem Possible Cause Solution CD/External disc control mode No Panel FM tuner section SpecificationsAM tuner section Audio section CD player sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood