Kenwood KDC-X617, KDC-516S, KDC-57MR, KDC-V6017 instruction manual

Page 39

If you want to lock the faceplate to the unit so that it does not fall off, follow the directions below.

1 Refer to the function "Theft Deterrent Faceplate" (page 10) and remove the faceplate.

2 Insert the provided screw into the hole at the center of the bottom side of the faceplate which you have removed from the unit.

Accessory7

3 Push back the bottom of the faceplate bracket unit it locks.

4 Refer to the section "Theft Deterrent Faceplate (page 10)" and then reattaching the faceplate.

2CAUTION

Never insert the taptite screws (ø2 ⋅ 4 mm) in any other screw holes than the one specified. If you insert it in another hole, it will contract and may cause damage to the mechanical parts inside the unit.

Locking the faceplate to the unit

■

— 39 —

Image 39

Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning To prevent injury or fire, take the following precautions Safety precautionsLens Fogging Cleaning the CD SlotCleaning the Faceplate Terminals Cleaning the UnitChecking New CDs for Burrs Cleaning CDsHandling Compact discs Storing CDsDo Not Use CDs with Sticker on the Labeled Side Do Not Load CD AccessoriesRemoving the CD Do Not Use Special Shape CDsGeneral features PowerSwitching Modes Non-Fading Output VolumeAttenuator LoudnessHiding the control panel Theft Deterrent FaceplateRemoving the Faceplate Reattaching the FaceplateSpeaker & Woofer setting Switching the Preset Sound SettingSystem Q Audio control features Clock displayChanging the Clock Display Bass Quality Factor Audio Control SettingBass Center Frequency Bass LevelMiddle Quality Factor Middle Center FrequencyTreble Level Middle LevelHigh-pass Filter Frequency for Rear Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Front OutputTuning Tuner featuresTuning Selecting Tuning ModeAuto Memory Entry Station Preset MemoryCanceling Direct Access Tuning Recalling a Preset StationChanging the Display Station Name Preset SnpsSwitching Display for Tuner Assigning NamesCD/External disc control features Playing CDs Playing Other Disc modeSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Track Scan Track / Disc RepeatRandom Play Text / Title Scroll To scroll automaticallyTo scroll manually Presetting Disc Names Dnps Disc Name Preset Play Dnpp To cancel Dnpp mode Press the Dnpp buttonRapid display forward / reverse Canceling Direct Disc Search While It Is Operating Menu settingsSelecting function to set Enter the menu modeEnding the menu mode Press the Menu button Menu SystemSecurity Code If you press the Reset button or remove the batterySelectable Illumination Manual Time AdjustmentSwitching Graphic Display Touch Sensor ToneVariable Illumination Color Setting Contrast AdjustmentDimmer External Amp Control Text Scroll In External disc control modeLoading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner featuresCD/External disc control features Installation Procedure AccessoriesACC Connecting Wires to TerminalsInstalling in Japanese-Made Cars InstallationRemoving the Unit Removing the hard rubber framePage Problem Possible Cause Solution Troubleshooting GuideProblem Possible Cause Solution CD/External disc control mode No Panel CD player section SpecificationsFM tuner section AM tuner section Audio sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood