Kenwood KDC-V6017, KDC-516S, KDC-57MR, KDC-X617 instruction manual CD/External disc control mode

Page 42

English

Troubleshooting Guide

CD/External disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

The disc control mode cannot

No wire has been connected to the disc changer input

Connect the wire to the disc changer input terminal on

be selected.

terminal on the unit.

the unit.

 

 

 

 

The specified disc does not

The specified CD is quite dirty.

Clean the CD.

play, but another one plays

 

 

 

instead.

The CD is upside-down.

Load the CD with the labeled side up.

 

 

 

 

 

 

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the

 

 

 

specified disc.

 

 

 

 

 

 

The disc is severely scratched.

Try another disc instead.

 

 

 

 

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

 

 

 

 

 

 

The CD is scratched or dirty.

If skipping happens at the same place when the car is

 

 

 

stopped, something with the CD is wrong. Clean the CD.

 

 

 

 

The display shows that the

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see p. 5).

changer is being played, but no

 

 

sound can be heard.

 

 

 

 

 

The specified track will not

Random play or magazine random play has been

Turn off random play or magazine random play.

play.

selected.

 

 

 

 

Track repeat, disc repeat, track

The setting is not cancelled.

The settings for these functions remain on until the

scan, random play, and

 

setting to off or the disc ejected, even if the power is

magazine random play start by

 

turned off or the source changed.

themselves.

 

 

 

 

 

 

Cannot play CD-R or CD-RW

Finalization processing is not being conducted for CD-

Conduct finalization processing with CD recorder.

 

 

R/CD-RW.

 

 

 

 

 

 

 

A non-compatible CD changer is being used to play the

Use a CD changer compatible with CD-R/CD-RW to play.

 

 

CD-R/CD-RW.

 

 

 

 

 

If the following situations, consult your nearest service center:

Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.

Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when switching modes.

— 42 —

Image 42
Contents KDC-X617 KDC-V6017 KDC-516S KDC-57MR Contents 2Warning Safety precautions To prevent injury or fire, take the following precautionsCleaning the Unit Cleaning the CD SlotCleaning the Faceplate Terminals Lens FoggingStoring CDs Cleaning CDsHandling Compact discs Checking New CDs for BurrsDo Not Use Special Shape CDs Do Not Load CD AccessoriesRemoving the CD Do Not Use CDs with Sticker on the Labeled SideGeneral features PowerSwitching Modes Loudness VolumeAttenuator Non-Fading OutputReattaching the Faceplate Theft Deterrent FaceplateRemoving the Faceplate Hiding the control panelSpeaker & Woofer setting Switching the Preset Sound SettingSystem Q Audio control features Clock displayChanging the Clock Display Bass Level Audio Control SettingBass Center Frequency Bass Quality FactorMiddle Level Middle Center FrequencyTreble Level Middle Quality FactorHigh-pass Filter Frequency for Front Output Phase for Non-Fading OutputVolume Offset High-pass Filter Frequency for Rear OutputSelecting Tuning Mode Tuner featuresTuning TuningRecalling a Preset Station Station Preset MemoryCanceling Direct Access Tuning Auto Memory EntryAssigning Names Station Name Preset SnpsSwitching Display for Tuner Changing the DisplayCD/External disc control features Playing Other Disc mode Playing CDsSwitching Display for Discs Fast Forwarding and Reversing Disc PlayTrack Search Track Scan Track / Disc RepeatRandom Play Text / Title Scroll To scroll automaticallyTo scroll manually Presetting Disc Names Dnps Disc Name Preset Play Dnpp To cancel Dnpp mode Press the Dnpp buttonRapid display forward / reverse Menu settings Canceling Direct Disc Search While It Is OperatingMenu System Enter the menu modeEnding the menu mode Press the Menu button Selecting function to setIf you press the Reset button or remove the battery Security CodeTouch Sensor Tone Manual Time AdjustmentSwitching Graphic Display Selectable IlluminationVariable Illumination Color Setting Contrast AdjustmentDimmer Text Scroll In External disc control mode External Amp ControlBasic Operations of remote Loading and Replacing the BatteriesTuner features Basic operationsCD/External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation Installing in Japanese-Made CarsRemoving the hard rubber frame Removing the UnitPage Troubleshooting Guide Problem Possible Cause SolutionProblem Possible Cause Solution CD/External disc control mode No Panel AM tuner section Audio section SpecificationsFM tuner section CD player sectionPage RiiGGiq Warranty Card WHO is Protected KDC-X617 Page Excelon Kenwood