Axis Communications Q1614-E NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 53

AXIS Q1614-E Network Camera

System Options

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS on page 48.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Axis Q1614-E Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1614-E Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Axis Q1614-E Network Camera Network Connector Connectors and ButtonsConnector For technical specifications, seeLED Indicators Status LED Behavior for Focus Assistant Buzzer Signal for Focus AssistantColor BuzzerColor Buzzer Camera position Replace the LensAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode PTZ ModeSet Power Line Frequency Live ViewControls on the Live View Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Axis Media Control viewer toolbarPTZ Controls Axis Q1614-E Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsFocus Adjustment Set Up the ProductBasic Setup Video Stream Video and AudioPixel Counter Image264 Click Save to apply the new settingsStream Profiles Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Exposure Settings Lightfinder ModeImage Appearance White BalanceIris adjustment Iris configurationSet Shutter to Day/NightView Area To configure the view areaOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Overlay ImageUse Overlay Text in an Action Rule Focus Privacy MaskGo to Events Action Rules BasicAudio Input Audio SettingsAudio Modes Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourDevice Settings Install PTZ DriverAdvanced Control QueueOperator Same as administrator but with lower priority Camera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1614-E Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddActions Add Recipients Set Up Email RecipientsPTZ Control Go to Events Recipients and click AddCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddFind Recordings RecordingsPlay Recording Go to Recordings ListContinuous Recording Export Video ClipTo play a recording, follow these steps Go to Recordings ContinuousLanguages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Bonjour StorageSD Card Mount and Unmount SD CardNetwork Share Under General Settings, select Autoformat toTo add a network share Go to System Options Storage Click Network SharePorts & Devices MaintenanceSupport Overview SupportSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Audio input Function/group Specifications Audio Audio streamingAudio output Network SecurityPower Function/group SpecificationsConnectors DimensionsConnectors Performance Considerations RS485/422 ConnectorOutput Function PinAxis Q1614-E Network Camera M5.5
Top Page Image Contents