Axis Communications Q1614-E user manual Advanced TCP/IP Settings, Axis Video Hosting System Avhs

Page 52

AXIS Q1614-E Network Camera

System Options

ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press and hold the product’s control button (see Hardware Overview on page 6 ) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Axis Q1614-E Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1614-E Network CameraConnectors Performance Considerations Hardware Overview Axis Q1614-E Network Camera Connectors and Buttons Network ConnectorConnector For technical specifications, seeLED Indicators Buzzer Signal for Focus Assistant Status LED Behavior for Focus AssistantColor BuzzerReplace the Lens Color Buzzer Camera positionAccess the Product Access from a BrowserAccess from the Internet Set the Root PasswordPTZ Mode Configure Capture ModeSet Power Line Frequency Live ViewGo to Setup Events Controls on the Live ViewManual Trigger To show the manual trigger buttons in the Live ViewPTZ Controls Axis Media Control viewer toolbarAMC Audio Controls Axis Q1614-E Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingBasic Setup Set Up the ProductFocus Adjustment Video and Audio Video StreamPixel Counter ImageStream Profiles Click Save to apply the new settings264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Lightfinder Mode Exposure SettingsImage Appearance White BalanceIris configuration Iris adjustmentSet Shutter to Day/NightTo configure the view area View AreaOverlay Go to Video & Audio Video Stream and select the Image tabUse Overlay Text in an Action Rule Overlay ImageGo to Video & Audio Overlay Image Privacy Mask FocusGo to Events Action Rules BasicAudio Modes Audio SettingsAudio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourInstall PTZ Driver Device SettingsAdvanced Control QueueOperator Same as administrator but with lower priority Detectors Camera TamperingMotion Detection Shock DetectionSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Install Application Go to Setup ApplicationsApplications Application LicensesAxis Q1614-E Network Camera Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddActions Set Up Email Recipients Add RecipientsPTZ Control Go to Events Recipients and click AddSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Find RecordingsPlay Recording Go to Recordings ListExport Video Clip Continuous RecordingTo play a recording, follow these steps Go to Recordings ContinuousLanguages System Options SecurityUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee To install a self-signed certificate Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Storage BonjourSD Card Mount and Unmount SD CardUnder General Settings, select Autoformat to Network ShareTo add a network share Go to System Options Storage Click Network ShareMaintenance Ports & DevicesSupport Support OverviewSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Audio Audio streaming Audio inputAudio output Network SecurityFunction/group Specifications PowerConnectors DimensionsConnectors RS485/422 Connector Performance ConsiderationsOutput Function PinAxis Q1614-E Network Camera M5.5
Top Page Image Contents