Axis Communications Q1614-E user manual QoS Quality of Service, Ftp

Page 54

AXIS Q1614-E Network Camera

System Options

Note

•For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

•The router has many different names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.

Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnPTM. Note that UPnPTM must be enabled in the product (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is entered here, a port number is automatically selected when NAT traversal is enabled.

Note

•An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port is automatically selected.

•When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced.

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark different types of traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Axis Q1614-E Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1614-E Network CameraConnectors Performance Considerations Hardware Overview Axis Q1614-E Network Camera Connector Connectors and ButtonsNetwork Connector For technical specifications, seeLED Indicators Color Buzzer Signal for Focus AssistantStatus LED Behavior for Focus Assistant BuzzerReplace the Lens Color Buzzer Camera positionAccess from the Internet Access the ProductAccess from a Browser Set the Root PasswordSet Power Line Frequency PTZ ModeConfigure Capture Mode Live ViewManual Trigger Go to Setup EventsControls on the Live View To show the manual trigger buttons in the Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis Q1614-E Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupFocus Adjustment Pixel Counter Video and AudioVideo Stream ImageClick Save to apply the new settings Stream Profiles264 Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Image Appearance Lightfinder ModeExposure Settings White BalanceSet Shutter to Iris configurationIris adjustment Day/NightOverlay To configure the view areaView Area Go to Video & Audio Video Stream and select the Image tabOverlay Image Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action Rules Privacy MaskFocus BasicAudio Settings Audio ModesAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions Guard TourAdvanced Install PTZ DriverDevice Settings Control QueueOperator Same as administrator but with lower priority Motion Detection DetectorsCamera Tampering Shock DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionAudio Detection Applications Install ApplicationGo to Setup Applications Application LicensesAxis Q1614-E Network Camera Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddActions PTZ Control Set Up Email RecipientsAdd Recipients Go to Events Recipients and click AddTo create a new schedule Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddPlay Recording RecordingsFind Recordings Go to Recordings ListTo play a recording, follow these steps Export Video ClipContinuous Recording Go to Recordings ContinuousLanguages Users System OptionsSecurity IP Address FilterIeee CertificatesGo to System Options Security Ieee Click Install certificate and upload the certificate To install a self-signed certificateGo to Setup System Options Security Certificates Date & TimeBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 SD Card StorageBonjour Mount and Unmount SD CardTo add a network share Under General Settings, select Autoformat toNetwork Share Go to System Options Storage Click Network ShareMaintenance Ports & DevicesSystem Overview SupportSupport Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Audio output Function/group Specifications Audio Audio streamingAudio input Network SecurityConnectors Function/group SpecificationsPower DimensionsConnectors Output RS485/422 ConnectorPerformance Considerations Function PinAxis Q1614-E Network Camera M5.5
Top Page Image Contents