Axis Communications Q6044-C user manual Setting Up an Action Rule, Time, PTZ Control

AXIS Q6044-C PTZ Dome Network Camera

Events

-Shock Detected — Trigger the rule when the Axis product detects it has been tilted or hit. See Shock Detection, on page 34.

-System Ready — trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence — trigger the rule periodically, see Recurrences, on page 41. This can for example be used to upload an image every 5 minutes.

-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 41.

Available actions include:

•Day/Night Vision Mode — set day mode (IR cut filter on) or night mode (IR cut filter off).

•Overlay Text — display an overlay text, see Using Overlay Text in an Action Rule, on page 24.

•PTZ Control

-Autotracking — start autotracking, see Autotracking, on page 30.

-Preset Position — go to a preset position.

-Guard Tour — start a guard tour, see Guard Tour, on page 31.

•Record Video — record video to a selected storage.

•Send Images — send images to a recipient.

•Send Notifications — send a notification message to a recipient.

•Send Video Clip — send a video clip to a recipient.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.

Set up motion detection and add a network share:

1.Go to Detectors > Motion Detection and configure a motion detection window, see page 34

2.Go to System Options > Storage and set up the network share, see page 53.

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions, see below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

39