Axis Communications Q6044-C user manual Recordings, Recording List, Continuous Recording

Page 43

AXIS Q6044-C PTZ Dome Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 43.

•To set up action rules, see page 39.

•To access recordings, see Recording List, on page 43.

•To configure camera controlled storage, see Storage, on page 52.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage, on page 52 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis Q6044-C PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6044-C PTZ Dome Network Camera Table of ContentsTechnical Specifications Camera Connectors and ButtonsHardware Overview Hardware OverviewSD Card Slot LED IndicatorsMulti-connector Power ButtonMedia Converter Switch Connectors Hardware Overview Media Converter SwitchDip switch position Network Connector Dip SwitchesConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Click Use Https Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedAxis Media Control viewer toolbar Accessing the Product Live ViewGo to Setup Events Controls on the Live ViewTour Recording, on PTZ ControlsAxis Q6044-C PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis Q6044-C PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video StreamImage Stream Profiles264 White Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Go to Video Overlay ImageAxis Q6044-C PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis Q6044-C PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Gatekeeper AutotrackingTour Recording Guard TourAdvanced Osdi ZonesLimits Controls Control QueueShock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Application Licenses Install ApplicationApplications ApplicationsAxis Q6044-C PTZ Dome Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleTime PTZ Control Go to Events Recipients and click Add Recipients Fallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis Q6044-C PTZ Dome Network Camera Continuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Go to System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingNTP Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Ports & Devices MaintenanceSupport File Upload Plain ConfigLogs & Reports ScriptingSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Media converter switch Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationInstallation aid MaintenancePower connector DC input Function/group SpecificationsWeight AccessoriesTerminal connector internal Power connector DC outputNetwork connector internal Terminal connector externalAxis Q6044-C PTZ Dome Network Camera M2.2
Related manuals
Manual 67 pages 29.26 Kb
Top Page Image Contents