AXIS Q6044-C PTZ Dome Network Camera
Hardware Overview
Media Converter Switch
1Power connector (DC input)
2Power connector (DC output)
3Network connector (internal)
4Network connector SFP (external) (2x)
5Network connector RJ45 (external) (2x)
6Camera LED indicator
7Network LED indicator (4x)
8Power LED indicator
9Ground clip
10I/O connector (internal)
11I/O connector (external)
12
13Ground screw
Media Converter Switch Connectors
For technical specifications, see page 62.
NOTICE
The product shall be connected using a shielded network cable (STP) or an optical fiber cable. All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. See Electromagnetic Compatibility (EMC), on page 2 for regulatory requirements.
Important
The media converter switch does not support hotswapping. Disconnect power from the switch before swapping cameras. An attempt to hotswap could cause the switch to freeze, in which case it must be restarted.
Power connector (DC input) -
Power connector (DC output) - Two
Network connector RJ45 (external) - Two RJ45 connectors
8