Axis Communications Q6044-C user manual Multi-Connector Cable, Function Pin wire Specifications

Page 57

AXIS Q6044-C PTZ Dome Network Camera

Multi-Connector Cable

Multi-Connector Cable

The supplied multi-connector cable is required in order to maintain the camera’s IP rating.

Connect the multi-connector cable to the camera’s multi-connector and to the connectors in the supplied media converter switch, see page 6 .

The cable provides the following signals:

• DC power

• Network (Ethernet 10/100Base-T)

• Input/Output (I/O)

Function	Pin – wire		Notes	Specifications

Configurable (Input	2	– blue	Digital input – Connect to GND to activate, or	0 to +30 V DC
or Output)			leave floating (unconnected) to deactivate.

	7	– yellow	Digital output – Internal connection to ground	Max load =
			when activated, floating (unconnected) when	100 mA
			deactivated. If used with an external relay, a diode	Max voltage =
			must be connected in parallel with the load, for	Max voltage =
			must be connected in parallel with the load, for	+30 V DC
			protection against voltage transients.	+30 V DC
			protection against voltage transients.

RX+	3	– green/white	Ethernet – receiving

RX-	4	– green	Ethernet – receiving

TX+	5	– orange/white	Ethernet – transmitting

TX-	6	– orange	Ethernet – transmitting

GND	8	– black	Ground

12 V power	1, 9 – red		Used to power camera	12–13.2 V DC
				Max load = 6 A

57

Image 57

Contents Axis Q6044-C PTZ Dome Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q6044-C PTZ Dome Network Camera Table of ContentsTechnical Specifications Hardware Overview Connectors and ButtonsHardware Overview CameraMulti-connector LED IndicatorsPower Button SD Card SlotMedia Converter Switch Connectors Hardware Overview Media Converter SwitchNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Use HttpsGo to Setup Events Accessing the Product Live ViewControls on the Live View Axis Media Control viewer toolbarTour Recording, on PTZ ControlsAxis Q6044-C PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis Q6044-C PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Video Overlay Image Go to Events Action RulesAxis Q6044-C PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis Q6044-C PTZ Dome Network Camera Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Gatekeeper ConfigurationAutotracking Exclude AreasTour Recording Guard TourOsdi Zones AdvancedLimits Controls Control QueueDetectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Applications Install ApplicationApplications Application LicensesAxis Q6044-C PTZ Dome Network Camera Events EventsTime Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddFallback Action RecipientsRecipient Use with action Go to Events Recipients and click AddSchedules Setting Up an Email RecipientRecurrences Go to Events Schedules and click AddAxis Q6044-C PTZ Dome Network Camera Recordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsNetwork Go to System Options Security CertificatesIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Maintenance System Options Ports & Devices Support Logs & Reports Plain ConfigScripting File UploadSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Video and image problems, generalStorage and disk management problems Media converter switchTechnical Specifications Technical SpecificationsInstallation aid Function/group Specifications System ApplicationMaintenance PowerWeight Function/group SpecificationsAccessories Power connector DC inputNetwork connector internal Power connector DC outputTerminal connector external Terminal connector internalAxis Q6044-C PTZ Dome Network Camera M2.2

Related manuals

Manual 67 pages 29.26 Kb