Axis Communications Q6044-C user manual QoS Quality of Service, Smtp email

Page 51

AXIS Q6044-C PTZ Dome Network Camera

System Options

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is entered here, a port number is automatically selected when NAT traversal is enabled.

Note

•An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port is automatically selected.

•When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced.

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: live video, event/alarm traffic and management traffic.

SMTP (email)

To send email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the fields provided. A From email address is also required. If the mail server requires authentication, check Use authentication to log in to this server and enter the necessary information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups.

The Axis product can be configured to support SNMP on the System Options > Network > SNMP page.

Depending on the level of security required, select the version on SNMP to use.

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Axis Q6044-C PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6044-C PTZ Dome Network Camera Table of ContentsTechnical Specifications Camera Connectors and ButtonsHardware Overview Hardware OverviewSD Card Slot LED IndicatorsMulti-connector Power ButtonMedia Converter Switch Connectors Hardware Overview Media Converter SwitchNetwork Connector Dip Switches Dip switch positionConnector internal 2-pin I/O terminal block Description Media Converter Switch LED IndicatorsAccessing the Product Accessing the ProductAccess from a Browser Click Use Https Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedAxis Media Control viewer toolbar Accessing the Product Live ViewGo to Setup Events Controls on the Live ViewTour Recording, on PTZ ControlsAxis Q6044-C PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis Q6044-C PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video StreamStream Profiles Image264 White Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Go to Video Overlay ImageAxis Q6044-C PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis Q6044-C PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Gatekeeper AutotrackingTour Recording Guard TourOsdi Zones AdvancedLimits Controls Control QueueShock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Application Licenses Install ApplicationApplications ApplicationsAxis Q6044-C PTZ Dome Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleTime PTZ ControlGo to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis Q6044-C PTZ Dome Network Camera Continuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityIeee CertificatesGo to System Options Security Ieee Go to System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingNTP Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationHost Name Configuration Link-Local IPv4 AddressNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Network Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Maintenance System Options Ports & DevicesSupport File Upload Plain ConfigLogs & Reports ScriptingSystem Options Reset to Factory Default Settings Multi-Connector Cable Multi-Connector CableFunction Pin wire Specifications Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Media converter switch Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationInstallation aid MaintenancePower connector DC input Function/group SpecificationsWeight AccessoriesTerminal connector internal Power connector DC outputNetwork connector internal Terminal connector externalAxis Q6044-C PTZ Dome Network Camera M2.2
Related manuals
Manual 67 pages 29.26 Kb
Top Page Image Contents