Axis Communications P5522 user manual Network, Basic TCP/IP Settings

Page 39

AXIS P5522 PTZ Dome Network Camera

System Options

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 40.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 40.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DCHP can update a DNS server, which when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 46) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis P5522 PTZ Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P5522 PTZ Dome Network Camera Table of contentsConnectors Hardware overviewHardware overview Color Indication LED indicatorsStart a browser Internet Explorer, Firefox, Safari Accessing the productAccessing the product Access from a browserClick Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedLive View Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio controls PTZ ControlsAxis P5522 PTZ Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Image Video and AudioVideo and Audio Video StreamImage Appearance Camera SettingsStream Profiles 264Wide Dynamic Range Exposure SettingsImage settings White balanceOverlay image Audio SettingsOverlay Privacy MaskAudio Output Audio InputAudio Clips Default viewer for browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsAxis P5522 PTZ Dome Network Camera Guard Tour Preset positionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomGo to PTZ Guard Tour and click Add Osdi ZonesAdvanced LimitsSee the online help for more information Operator Same as administrator but with lower priorityControl Queue ControlsApplications ApplicationsServer type Purpose Information required EventsEvents Event ServersSet up a triggered event Event TypesGo to Events Event Types and click Add triggered Set up a scheduled event Save streamGo to Events Event Types and click Add scheduled Go to Events Motion Detection Set up motion detectionGatekeeper Motion detectionMotion detection parameters Audio detection Port StatusGo to Events Audio Detection Recordings RecordingsEvent recordings Go to Recordings Continuous Continuous recordingAxis P5522 PTZ Dome Network Camera System Options System OptionsSecurity Audio Support Date & TimeNetwork Basic TCP/IP SettingsNTP Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Maintenance Ports & DevicesSupport File Upload ScriptingPlain Config Reset to factory default settingsMulti-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector DC power input Connection diagramChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProduct is accessible locally but not externally Symptoms, possible causes and remedial actionsProblems setting the IP address Camera cannot be accessed from a browserKey frames Problems with the H.264 formatVideo and image problems, general Video & Audio Camera SettingsOverlay image is not displayed Problems uploading filesSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance General Casing Alarm triggersAlarm events InstallationPerformance considerations M2.4
Related manuals
Manual 66 pages 12.29 Kb
Top Page Image Contents