Axis Communications P5522 user manual LED indicators, Color Indication

Page 5

AXIS P5522 PTZ Dome Network Camera

Hardware overview

•AC/DC power supply

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating, see Multi-Connector Cable (sold separately), on page 47.

SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage. For instructions on how to insert and remove an SD card, please refer to the Installation Guide.

Note

Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup > System Options > Storage > SD Card and click Unmount.

LED indicators

Color	Indication

Unlit	Connection and normal operation

Amber	Steady during startup. Flashes during ﬁrmware upgrade.

Amber/red	Flashes amber/red if network connection is unavailable or lost.

Red	Flashes red for ﬁrmware upgrade failure.

Green	Shows steady green for 10 seconds for normal operation after restart.

Note

•The Status LED can be conﬁgured to be unlit during normal operation, or to ﬂash only when the product is accessed. To conﬁgure, go to Setup > System Options > LED Settings. See the online help for more information.

5

Image 5

Contents Axis P5522 PTZ Dome Network Camera Liability About this document Intellectual Property Rights Equipment ModiﬁcationsAxis P5522 PTZ Dome Network Camera Table of contentsHardware overview ConnectorsHardware overview Color Indication LED indicatorsAccessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariSet the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateAxis Media Control viewer toolbar Live ViewControls on the Live View AMC Audio controls PTZ ControlsAxis P5522 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsBasic Setup Setting up the productSetting up the product Video and Audio Video and AudioVideo Stream ImageStream Proﬁles Camera Settings264 Image AppearanceImage settings Exposure SettingsWhite balance Wide Dynamic RangeOverlay Audio SettingsPrivacy Mask Overlay imageAudio Output Audio InputAudio Clips Live View Conﬁg Default viewer for browsersLive View Conﬁg User Deﬁned Links Viewer SettingsOutput Buttons Browser Viewer DescriptionAxis P5522 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset positionsPTZ Pan Tilt Zoom Guard TourAdvanced Osdi ZonesLimits Go to PTZ Guard Tour and click AddControl Queue Operator Same as administrator but with lower priorityControls See the online help for more informationApplications ApplicationsEvents EventsEvent Servers Server type Purpose Information requiredGo to Events Event Types and click Add triggered Set up a triggered eventEvent Types Go to Events Event Types and click Add scheduled Set up a scheduled eventSave stream Gatekeeper Set up motion detectionMotion detection Go to Events Motion DetectionMotion detection parameters Go to Events Audio Detection Audio detectionPort Status Event recordings RecordingsRecordings Go to Recordings Continuous Continuous recordingAxis P5522 PTZ Dome Network Camera Security System OptionsSystem Options Audio Support Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Conﬁguration NTP ConﬁgurationNAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourSupport MaintenancePorts & Devices File Upload ScriptingPlain Conﬁg Reset to factory default settingsFunction Pin Speciﬁcations Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately Connector DC power input Connection diagramTroubleshooting TroubleshootingEmergency recovery procedure Checking the ﬁrmwareProblems setting the IP address Symptoms, possible causes and remedial actionsCamera cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with the H.264 formatVideo & Audio Camera Settings Key framesSettings Problems uploading ﬁlesStorage and disk management problems Overlay image is not displayedTechnical Speciﬁcations Technical SpeciﬁcationsAlarm events Alarm triggersInstallation Maintenance General CasingPerformance considerations M2.4

Related manuals

Manual 66 pages 12.29 Kb