Axis Communications P5522 user manual PTZ Controls, AMC Audio controls

Page 9

AXIS P5522 PTZ Dome Network Camera

Accessing the product

Click the View Full Screen button and the video image will ﬁll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be speciﬁed in the AMC Control Panel.

AMC Audio controls

AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled.

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - Network Camera speaker only mode, click this button to stop sending audio to the product.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be conﬁgured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – Network Camera speaker only mode

To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for speciﬁed users under System Options > Security > Users.

With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer.

Click the Center mode button and click in the image to center the camera view on that position.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls. User-deﬁned buttons can also appear in the Control panel. See Controls, on page 26.

Select a PTZ preset position to steer the camera view to the saved position. See Preset positions, on page 24.

9

Image 9

Contents Axis P5522 PTZ Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModiﬁcationsAxis P5522 PTZ Dome Network Camera Table of contentsConnectors Hardware overviewHardware overview Color Indication LED indicatorsAccessing the product Accessing the productAccess from a browser Start a browser Internet Explorer, Firefox, SafariSet the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certiﬁcateLive View Controls on the Live ViewAxis Media Control viewer toolbar AMC Audio controls PTZ ControlsAxis P5522 PTZ Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative methods of accessing the video streamJava applet supports simplex audio with G.711 encoding Accessing audio streamsSetting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Proﬁles Camera Settings264 Image AppearanceImage settings Exposure SettingsWhite balance Wide Dynamic RangeOverlay Audio SettingsPrivacy Mask Overlay imageAudio Output Audio InputAudio Clips Default viewer for browsers Live View ConﬁgLive View Conﬁg User Deﬁned Links Viewer SettingsOutput Buttons Browser Viewer DescriptionAxis P5522 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset positionsPTZ Pan Tilt Zoom Guard TourAdvanced Osdi ZonesLimits Go to PTZ Guard Tour and click AddControl Queue Operator Same as administrator but with lower priorityControls See the online help for more informationApplications ApplicationsEvents EventsEvent Servers Server type Purpose Information requiredSet up a triggered event Event TypesGo to Events Event Types and click Add triggered Set up a scheduled event Save streamGo to Events Event Types and click Add scheduled Gatekeeper Set up motion detectionMotion detection Go to Events Motion DetectionMotion detection parameters Audio detection Port StatusGo to Events Audio Detection Recordings RecordingsEvent recordings Go to Recordings Continuous Continuous recordingAxis P5522 PTZ Dome Network Camera System Options System OptionsSecurity Audio Support Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Conﬁguration NTP ConﬁgurationNAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourMaintenance Ports & DevicesSupport File Upload ScriptingPlain Conﬁg Reset to factory default settingsMulti-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Speciﬁcations Connector DC power input Connection diagramTroubleshooting TroubleshootingEmergency recovery procedure Checking the ﬁrmwareProblems setting the IP address Symptoms, possible causes and remedial actionsCamera cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with the H.264 formatVideo & Audio Camera Settings Key framesSettings Problems uploading ﬁlesStorage and disk management problems Overlay image is not displayedTechnical Speciﬁcations Technical SpeciﬁcationsAlarm events Alarm triggersInstallation Maintenance General CasingPerformance considerations M2.4

Related manuals

Manual 66 pages 12.29 Kb