Axis Communications Q6045-E user manual Osdi Zones, Advanced, Tour Recording, Limits

Page 28

AXIS Q6045-E PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

To modify or remove guard tours, go to PTZ > Guard Tour, select the guard tour in the Guard Tour List and click Modify/Remove.

For more information see the online help .

Tour Recording

The guard tour function in this product includes tour recording, which allows recording of a custom tour using an input device such as a joystick, mouse, keyboard or through the VAPIX® Application Programming Interface (API). A recorded tour displays the video stream of the recorded sequence of Pan/Tilt/Zoom movements, including their variable speeds and lengths.

To add a recorded tour:

1.Go to PTZ > Guard Tour and click Add.

2.Select Create a record tour and click OK.

3.Enter a descriptive name.

4.Specify the pause length between runs.

5.Click to start recording the Pan/Tilt/Zoom movements.

6.When satisfied, click.

7.Click OK.

Note

Only the name of the recorded tour and pause between runs can be modified. Starting a new recording will overwrite the existing guard tour.

The recorded tour can be activated from the Live View and Guard Tour pages or through events. For more information see

the online help .

OSDI Zones

On-Screen Direction Indicator (OSDI) zones can be included in the overlay text (see Overlay, on page 20) to aid the user to navigate the Axis product. Each OSDI zone is set up with coordinates and a descriptive name.

OSDI zones are set up under PTZ > OSDI Zones. The Axis product uses the coordinates of the center of the view to set the lower left and upper right zone areas. First navigate to where you would like the lowermost left point of the OSDI zone to be located. Click Get to set the coordinates. Proceed to where the upper right point of zone should be located and click Get. Give the zone a descriptive name and click OK.

To include the name of the OSDI zone in the overlay text, go to Video < Video Stream < Overlay Settings. Check the Include text box and enter the modifier #L in the field. For more information about modifiers, see File Naming & Date/Time Formats in

the online help .

Advanced

Limits

Define the pan, tilt, zoom and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted to narrow the area under surveillance.

Configure the near focus limit to avoid focusing on objects too close to the camera lens.

When Enable E-flipis selected, as it tilts down and continues to pan backwards, the Axis product will automatically correct the view and flip it 180 degrees. The left limit must be set to –180 degrees and the right limit to 180 degrees for e-flip to work.

28

Image 28
Contents Axis Q6045-E PTZ Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6045-E PTZ Dome Network CameraTechnical Specifications Connectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators Midspan LED IndicatorsPower Button SD Card SlotAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordNetwork TCP/IP Advanced Click Use HttpsAccessing the Product Live View Go to Setup EventsControls on the Live View Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6045-E PTZ Dome Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis Q6045-E PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterImage Stream Profiles264 Camera Settings Exposure SettingsImage Appearance White BalanceImage Settings OverlayOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6045-E PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsBrowser Viewer Description Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomConfiguration PTZ Pan Tilt Zoom AutotrackingExclude Areas Max LimitsGatekeeper Guard TourOsdi Zones AdvancedTour Recording LimitsControl Queue ControlsSet Up Motion Detection Windows DetectorsDetectors Shock DetectionObject Removed Motion Detection ParametersFence Detector Enter/Exit DetectorObject Counter Install Application ApplicationsApplications Application LicensesAxis Q6045-E PTZ Dome Network Camera Input Signal EventsEvents DetectorsSetting Up an Action Rule StorageSystem TimeRecipients Fallback ActionGo to Events Action Rules and click Add RecipientSetting Up an Email Recipient SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecurrences Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Basic TCP/IP Settings Date & TimeNetwork Go to System Options Security CertificatesIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration NTP ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT traversal port mapping for IPv4 QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Maintenance SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigScripting File UploadAxis Q6045-E PTZ Dome Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Video Camera SettingsStorage and disk management problems Key framesTechnical Specifications Technical SpecificationsFunction/group Specifications System Application Installation aidMaintenance PowerPerformance Considerations M2.2
Related manuals
Manual 65 pages 47.07 Kb Manual 24 pages 14.82 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.