Axis Communications Q6045-E Network Share, Go to System Options Storage and click SD Card

Page 50

AXIS Q6045-E PTZ Dome Network Camera

System Options

The Axis product supports SD cards with the following file systems:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be manually formatted to the desired file system. To format the SD card:

1.Insert the SD card in the SD card slot.

2.Go to System Options > Storage and click SD Card.

3.Click Format and select the desired file system.

Note

During formatting any previous data stored on the disk will be lost.

Mounting is done automatically when the card is inserted or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Go to System Options > Storage and click SD Card.

2.Click Unmount.

3.The card can now be removed.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under Recording Settings.

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings.

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Axis Q6045-E PTZ Dome Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6045-E PTZ Dome Network CameraTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewPower Button LED IndicatorsMidspan LED Indicators SD Card SlotAccess from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Use HttpsControls on the Live View Accessing the Product Live ViewGo to Setup Events Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6045-E PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis Q6045-E PTZ Dome Network Camera Basic Setup Setting Up the ProductSetting Up the Product Video Stream VideoVideo Pixel Counter264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings White BalanceOverlay Image Image SettingsOverlay Go to Video Video Stream and select the Image tabGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Axis Q6045-E PTZ Dome Network Camera Default Viewer for Browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomExclude Areas ConfigurationPTZ Pan Tilt Zoom Autotracking Max LimitsGatekeeper Guard TourTour Recording Osdi ZonesAdvanced LimitsControl Queue ControlsDetectors Set Up Motion Detection WindowsDetectors Shock DetectionObject Removed Motion Detection ParametersObject Counter Enter/Exit DetectorFence Detector Applications Install ApplicationApplications Application LicensesAxis Q6045-E PTZ Dome Network Camera Events Input SignalEvents DetectorsSystem Setting Up an Action RuleStorage TimeGo to Events Action Rules and click Add RecipientsFallback Action RecipientGo to Events Recipients and click Add Setting Up an Email RecipientSchedules Go to Events Schedules and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersGo to System Options Security Ieee IeeeCertificates Network Basic TCP/IP SettingsDate & Time Go to System Options Security CertificatesAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service NTP ConfigurationNAT traversal port mapping for IPv4 Host Name ConfigurationLink-Local IPv4 Address QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourGo to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card Support Overview System Options MaintenanceSupport System OverviewScripting Reset to Factory Default SettingsPlain Config File UploadAxis Q6045-E PTZ Dome Network Camera Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Storage and disk management problems Video and image problems, generalVideo Camera Settings Key framesTechnical Specifications Technical SpecificationsMaintenance Function/group Specifications System ApplicationInstallation aid PowerPerformance Considerations M2.2
Related manuals
Manual 65 pages 47.07 Kb Manual 24 pages 14.82 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.
Top Page Image Contents