Axis Communications Q6045-E user manual Events, Detectors, Hardware, Input Signal

Page 35

AXIS Q6045-E PTZ Dome Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available Action Rule triggers and conditions include:

•Applications — use installed applications to trigger the rule, see Applications, on page 33.

•Detectors

-Live Stream Accessed — trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 30.

-Enter/Exit — trigger the rule when an object has entered or exited the area, see Enter/Exit Detector, on page 32.

-Fence Detector — trigger the rule when an object has crossed a virtual line, see Fence Detector, on page 32

-Object Removed — trigger the rule when an object has been removed from a scene, see Object Removed, on page 31.

•Hardware

-Casing Open — trigger the rule if the casing of a connected external device, such as a junction box or cabinet (not included), is removed or opened. This can for example be used to send notifications of maintenance or unauthorized tampering.

-Fan — trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Heater — trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance notifications.

-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

•Input Signal

-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on page 10. This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs — can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

•PTZ

-Autotracking — trigger the rule when autotracking starts or stops, see Autotracking, on page 26.

-Error — trigger the rule if the PTZ functionality is not working correctly. This can for example be used to send maintenance notifications.

-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.

-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Axis Q6045-E PTZ Dome Network Camera Intellectual Property Rights About this documentLegal Considerations LiabilityLearn More SupportAxis Q6045-E PTZ Dome Network Camera Table of ContentsTechnical Specifications Hardware Overview Connectors and ButtonsNetwork Connector Hardware OverviewSD Card Slot LED IndicatorsMidspan LED Indicators Power ButtonAccess from a Browser Accessing the ProductAccessing the Product Click Use Https Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedManual Trigger Accessing the Product Live ViewGo to Setup Events Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis Q6045-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis Q6045-E PTZ Dome Network Camera Basic Setup Setting Up the ProductSetting Up the Product Pixel Counter VideoVideo Video Stream264 Stream ProfilesImage White Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Axis Q6045-E PTZ Dome Network Camera Default Viewer for Browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomMax Limits ConfigurationPTZ Pan Tilt Zoom Autotracking Exclude AreasGuard Tour GatekeeperLimits Osdi ZonesAdvanced Tour RecordingControls Control QueueShock Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Object RemovedObject Counter Enter/Exit DetectorFence Detector Application Licenses Install ApplicationApplications ApplicationsAxis Q6045-E PTZ Dome Network Camera Detectors Input SignalEvents EventsTime Setting Up an Action RuleStorage SystemRecipient RecipientsFallback Action Go to Events Action Rules and click AddGo to Events Schedules and click Add Setting Up an Email RecipientSchedules Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityGo to System Options Security Ieee IeeeCertificates Go to System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingNTP Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 Host Name ConfigurationLink-Local IPv4 Address Smtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Network ShareGo to System Options Storage and click SD Card System Overview System Options MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis Q6045-E PTZ Dome Network Camera Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Key frames Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationInstallation aid MaintenancePerformance Considerations M2.2
Related manuals
Manual 65 pages 47.07 Kb Manual 24 pages 14.82 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.
Top Page Image Contents