Axis Communications Q6045-E user manual Recordings, Recording List, Continuous Recording

Page 40

AXIS Q6045-E PTZ Dome Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 40.

•To set up action rules, see page 36.

•To access recordings, see Recording List, on page 40.

•To configure camera controlled storage, see Storage, on page 49.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage, on page 49 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Axis Q6045-E PTZ Dome Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q6045-E PTZ Dome Network CameraTechnical Specifications Connectors and Buttons Network ConnectorHardware Overview Hardware OverviewLED Indicators Midspan LED IndicatorsPower Button SD Card SlotAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordNetwork TCP/IP Advanced Click Use HttpsAccessing the Product Live View Go to Setup EventsControls on the Live View Manual TriggerAxis Media Control viewer toolbar PTZ ControlsAxis Q6045-E PTZ Dome Network Camera How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis Q6045-E PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterImage Stream Profiles264 Camera Settings Exposure SettingsImage Appearance White BalanceImage Settings OverlayOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6045-E PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsBrowser Viewer Description Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomConfiguration PTZ Pan Tilt Zoom AutotrackingExclude Areas Max LimitsGatekeeper Guard TourOsdi Zones AdvancedTour Recording LimitsControl Queue ControlsSet Up Motion Detection Windows DetectorsDetectors Shock DetectionObject Removed Motion Detection ParametersFence Detector Enter/Exit DetectorObject Counter Install Application ApplicationsApplications Application LicensesAxis Q6045-E PTZ Dome Network Camera Input Signal EventsEvents DetectorsSetting Up an Action Rule StorageSystem TimeRecipients Fallback ActionGo to Events Action Rules and click Add RecipientSetting Up an Email Recipient SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecurrences Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Basic TCP/IP Settings Date & TimeNetwork Go to System Options Security CertificatesIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration NTP ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT traversal port mapping for IPv4 QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Maintenance SupportSupport Overview System OverviewReset to Factory Default Settings Plain ConfigScripting File UploadAxis Q6045-E PTZ Dome Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video and image problems, general Video Camera SettingsStorage and disk management problems Key framesTechnical Specifications Technical SpecificationsFunction/group Specifications System Application Installation aidMaintenance PowerPerformance Considerations M2.2
Related manuals
Manual 65 pages 47.07 Kb Manual 24 pages 14.82 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.
Top Page Image Contents