Axis Communications Q6045-E Recipients, Fallback Action, Go to Events Action Rules and click Add

Page 37

AXIS Q6045-E PTZ Dome Network Camera

Events

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions, see below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

8.Select Network Share from the Storage drop-down list.

To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Fallback Action

A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.

Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient.

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient

Email1

FTP

HTTP

HTTPS

Use with action

Send Images

Send Notification

Send Video Clip

Send Images Send Video Clip

Send Images

Send Notification

Send Video Clip

Send Images

Send Notification

Send Video Clip

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Axis Q6045-E PTZ Dome Network Camera Legal Considerations About this documentLiability Intellectual Property RightsLearn More SupportAxis Q6045-E PTZ Dome Network Camera Table of ContentsTechnical Specifications Network Connector Connectors and ButtonsHardware Overview Hardware OverviewMidspan LED Indicators LED IndicatorsPower Button SD Card SlotAccessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Use HttpsGo to Setup Events Accessing the Product Live ViewControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarAxis Q6045-E PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis Q6045-E PTZ Dome Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterImage Stream Profiles264 Exposure Settings Camera SettingsImage Appearance White BalanceOverlay Image SettingsOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Using Overlay Text in an Action RuleGo to Events Action Rules Axis Q6045-E PTZ Dome Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsBrowser Viewer Description Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Autotracking ConfigurationExclude Areas Max LimitsGuard Tour GatekeeperAdvanced Osdi ZonesTour Recording LimitsControls Control QueueDetectors Set Up Motion Detection WindowsDetectors Shock DetectionMotion Detection Parameters Object RemovedFence Detector Enter/Exit DetectorObject Counter Applications Install ApplicationApplications Application LicensesAxis Q6045-E PTZ Dome Network Camera Events Input SignalEvents DetectorsStorage Setting Up an Action RuleSystem TimeFallback Action RecipientsGo to Events Action Rules and click Add RecipientSchedules Setting Up an Email RecipientGo to Events Recipients and click Add Go to Events Schedules and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsNetwork Go to System Options Security CertificatesIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationLink-Local IPv4 Address Host Name ConfigurationNAT traversal port mapping for IPv4 Smtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share Support System Options MaintenanceSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadAxis Q6045-E PTZ Dome Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video Camera Settings Video and image problems, generalStorage and disk management problems Key framesTechnical Specifications Technical SpecificationsInstallation aid Function/group Specifications System ApplicationMaintenance PowerPerformance Considerations M2.2
Related manuals
Manual 65 pages 47.07 Kb Manual 24 pages 14.82 Kb

Q6045-E specifications

Axis Communications Q6045-E is an advanced network camera designed specifically for professional surveillance applications. This camera exemplifies Axis's commitment to high-performance video surveillance solutions, combining cutting-edge technology with robust design features.

One of the standout characteristics of the Q6045-E is its exceptional imaging capabilities. Equipped with a 1/2.8” sensor, it delivers high-resolution video at up to 1080p, ensuring clear and detailed images even in challenging lighting conditions. The camera supports a wide dynamic range (WDR), enabling it to capture high-quality images in environments with varying light levels, such as areas that experience both bright sunlight and deep shadows.

The Q6045-E also integrates a powerful 30x optical zoom lens, which allows for detailed close-ups of objects at a distance. This feature is essential for applications requiring precise identification, such as monitoring perimeters, parking lots, and business premises. The camera includes intelligent video analytics capabilities, providing features like motion detection, tampering alarm, and audio detection, enhancing the effectiveness of security measures.

Another noteworthy aspect is the camera’s PTZ (pan-tilt-zoom) functionality. It can pan 360 degrees and tilt from -20 to 90 degrees, providing extensive coverage and flexibility for optimal surveillance. This means a single Q6045-E can monitor vast areas, reducing the need for multiple cameras and thus lowering overall system costs.

Durability and reliability are also key features of the Q6045-E. Designed for outdoor use, the camera is IP66-rated and NEMA 4X-rated, which means it can withstand harsh weather conditions, including rain, snow, and extreme temperatures. The built-in heater ensures consistent performance in cold environments, maintaining both functionality and image quality.

The camera is powered over Ethernet (PoE), facilitating easy installation with just one cable for both data and power. This simplifies the setup process and reduces additional wiring costs. Additionally, the Q6045-E supports various video compression formats, including H.264 and H.265, allowing for efficient bandwidth usage without compromising video quality.

In conclusion, Axis Communications Q6045-E is a feature-rich choice for any professional surveillance system, offering high-resolution video, intelligent analytics, robust durability, and flexible installation options. Its innovative technologies make it an ideal solution for enhancing security and surveillance efforts in a wide range of environments.
Top Page Image Contents