Axis Communications P5522 user manual Midspan LED Indicators, SD Card Slot, Control Button

Page 9

AXIS P5522 PTZ Dome Network Camera

Hardware Overview

When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s NEMA/IP rating. For more information, see Multi-Connector Cable (sold separately) on page 57.

SD Card Slot

NOTICE

•Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.

•Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

This product supports SD/SDHC/SDXC card (not included).

For SD card recommendations, see www.axis.com

Control Button

For location of the control button, see Hardware Overview on page 7 .

The control button is used for:

•Resetting the product to factory default settings. See page 55.

•Connecting to an AXIS Video Hosting System service. See page 48. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 48. To connect, press and hold the button for about 3 seconds.

Restart Button

Press the restart button to restart the product.

LED Indicators

Note

• The Status LED can be configured to flash while an event is active.

Status LED	Indication

Unlit	Connection and normal operation.

Green	Shows steady green for 10 seconds for normal operation after startup completed.

Amber	Steady during startup. Flashes during firmware upgrade.

Amber/Red	Flashes amber/red if network connection is unavailable or lost.

Red	Flashes red for firmware upgrade failure.

Midspan LED Indicators

LED	Color	Indication

Port	Unlit	No camera connected.

	Green	Steady when camera connected, normal operation.

	Green, flashing	Slow flash	when overcurrent or short circuit condition on the port.

	Green, flashing	Fast flash	when input voltage is out of range or other internal error.

AC	Green	Steady when AC power input connected.

9

Image 9

Contents Axis P5522 PTZ Dome Network Camera Liability About this document Legal ConsiderationsIntellectual Property Rights Equipment ModificationsLearn More SupportAxis P5522 PTZ Dome Network Camera Table of ContentsPerformance Considerations Support Advanced Reset to Factory Default SettingsSafety Information Hazard LevelsOther Message Levels Hardware Overview Network Connector Connectors and ButtonsMulti-connector For technical specifications, seeMidspan LED Indicators LED IndicatorsSD Card Slot Control ButtonAccess the Product Access from a BrowserAccess from the Internet Set Power Line Frequency Set the Root PasswordLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls PTZ ControlsAxis P5522 PTZ Dome Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo and Audio Set Up Video StreamsPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Exposure Settings Camera SettingsImage Appearance White BalanceImage Settings OverlayGo to Video & Audio Video Stream and select the Image tab Overlay Image Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Privacy Mask Set Up AudioAudio Modes Go to Events Action RulesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons Preset Positions PTZ Pan Tilt ZoomGatekeeper Osdi Zones Guard TourAdvanced LimitsControls Control Queue Operator Same as administrator but with lower priorityDetectors Set Up Motion Detection WindowsMotion Detection Motion Detection ParametersAudio Detection Default valuesMedium level 50% Low level 0%Go to Setup Applications Install ApplicationApplications Application LicensesAxis P5522 PTZ Dome Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Go to Events Action Rules and click AddActions TriggersRecipient Types Add RecipientsPTZ Control Go to Events Recipients and click AddSet Up Email Recipients Create SchedulesGo to Events Schedules and click Add Go to Events Recurrences and click Add Set Up RecurrencesRecording List RecordingsContinuous Recording Go to Recordings ListLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis P5522 PTZ Dome Network Camera Cable provides the following connectors Multi-Connector Cable sold separatelyFunction Pin Specifications Drain, 100 mAConnector Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Setup Video & Audio Camera Settings Key framesStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Installation Function/group Specifications Network SecurityMaintenance General Casing PowerPerformance Considerations M5.2

Related manuals

Manual 56 pages 25.76 Kb