IP Camera 200 Series | Installation en 23 |
|
|
3.5Power connection
3.5.1DC power connection
1 |
|
|
|
|
2 |
|
|
| |
| 3 |
|
| |
|
| 4 |
|
|
I/O |
|
|
| |
| - | DC12V |
| |
|
| out | Reset | Ethernet |
|
|
| ||
|
|
|
| Line- |
|
|
|
| in |
Figure 3.5 DC power connection
1.Slide the plug adapter that matches your outlet socket onto the supplied power supply.
2.Insert the power connector jack from the power supply into the DC12V socket of the camera.
3.Connect the power supply to either a 230 VAC or a
120 VAC power supply outlet.
When power is supplied to the camera the LED on the bottom- front of the camera lights. (This LED can be disabled in the Installer menu.)
Note:
The date/time must be synchronized each time after power on. It is important to ensure that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording.
Bosch Security Systems | Installation and Operation Manual |