IP Camera 200 Series | Advanced Mode en 101 |
|
|
Appearing edges
Select this option if the selected area of the reference image includes a largely homogenous surface. If structures appear in this area, then an alarm is triggered.
Selecting the area
Select the image areas in the reference image that are to be monitored. The video image is subdivided into square fields. Activate or deactivate each of these fields individually.
Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered.
1.Click Select Area to configure the sensor fields. A new window opens.
2.If necessary, click Clear All first to clear the current selection (fields marked yellow).
3.
4.If necessary, click Select All to select the entire video- frame for monitoring.
5.
6.Click OK to save the configuration.
7.Click the close button (X) in the window title bar to close the window without saving the changes.
Bosch Security Systems | Installation and Operation Manual |