Axis Communications M3014 user manual System Options, Security, Users, IP Address Filter

Page 32

AXIS M3014 Network Camera

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility, reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

The Axis product supports encrypted browsing using HTTPS. This is configured on the System Options > Security > HTTPS page.

Aself-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed certificate to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only implemented after the installation of a signed certificate issued by a Certificate Authority.

To obtain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certificate is returned, click Install signed certificate to import the certificate. The properties of any certificate request currently resident in the product or installed can be viewed by clicking Properties.

To enable HTTPS in the Axis product, the HTTPS Connection Policy must be set for each user group.

For more information, see the online help.

32

Image 32
Contents Axis M3014 Network Camera About this document LiabilityIntellectual Property Rights Equipment ModificationsTable of Contents Axis M3014 Network CameraHardware overview Hardware overviewConnectors LED indicatorsMaintenance Color IndicationAccess from a browser Accessing the productAccessing the product Access from the Internet Set the root passwordNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Set Power Line FrequencyLive View Axis Media Control viewer toolbar PTZ ControlsHow to stream H.264 Media streamsMedia streams Axis Media Control AMCAlternative methods of accessing the video stream Axis M3014 Network Camera Basic Setup Setting up the productSetting up the product Video VideoVideo Stream Pixel Counter264 Stream ProfilesImage Camera Settings Exposure SettingsView Area Image AppearanceOverlay image OverlayPrivacy Mask Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourAdvanced ControlsDetectors DetectorsCamera Tampering Motion DetectionSet up motion detection Motion detection parametersRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M3014 Network Camera Recordings RecordingsRecording List Continuous recordingAxis M3014 Network Camera System Options System OptionsSecurity UsersDate & Time IeeeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailStorage UPnPTMRTP/H.264 BonjourMaintenance SupportSupport Overview System OverviewReset to factory default settings ScriptingFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Video and image problems, general Video Camera SettingsProblems uploading files No images displayed on webMotion Detection triggers unexpectedly Changes in luminanceTechnical Specifications Technical SpecificationsMaintenance Installation aids Memory PowerConnectors DimensionsPerformance considerations M1.7
Related manuals
Manual 52 pages 6.53 Kb