Axis Communications M3014 user manual Storage, UPnPTM, RTP/H.264, Bonjour, Network Share

Page 38

AXIS M3014 Network Camera

System Options

To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 32. To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to factory default settings, on page 40.

UPnPTM

The Axis product includes support for UPnPTM. UPnPTM is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

UPnPTM can be disabled under System Options > Network > UPnPTM.

RTP/H.264

The RTP port range and multicast settings are configured under System Options > Network > RTP.

The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings.

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

38

Image 38
Contents Axis M3014 Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis M3014 Network CameraHardware overview Hardware overviewMaintenance ConnectorsLED indicators Color IndicationAccess from a browser Accessing the productAccessing the product Network TCP/IP Advanced Access from the InternetSet the root password Click Create self-signed certificateControls on the Live View Set Power Line FrequencyLive View Axis Media Control viewer toolbar PTZ ControlsMedia streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Axis M3014 Network Camera Basic Setup Setting up the productSetting up the product Video Stream VideoVideo Pixel Counter264 Stream ProfilesImage View Area Camera SettingsExposure Settings Image AppearanceOverlay image OverlayPrivacy Mask Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced ControlsCamera Tampering DetectorsDetectors Motion DetectionSet up motion detection Motion detection parametersRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M3014 Network Camera Recording List RecordingsRecordings Continuous recordingAxis M3014 Network Camera Security System OptionsSystem Options UsersDate & Time IeeeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Http NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourSupport Overview MaintenanceSupport System OverviewFile Upload Reset to factory default settingsScripting Plain ConfigEmergency recovery procedure TroubleshootingTroubleshooting Checking the firmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Problems uploading files Video and image problems, generalVideo Camera Settings No images displayed on webMotion Detection triggers unexpectedly Changes in luminanceTechnical Specifications Technical SpecificationsConnectors Maintenance Installation aidsMemory Power DimensionsPerformance considerations M1.7
Related manuals
Manual 52 pages 6.53 Kb