Axis Communications M3014 user manual Advanced TCP/IP Settings

Page 35

AXIS M3014 Network Camera

System Options

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

35

Image 35
Contents Axis M3014 Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis M3014 Network Camera Table of ContentsHardware overview Hardware overviewColor Indication ConnectorsLED indicators MaintenanceAccess from a browser Accessing the productAccessing the product Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Set Power Line FrequencyLive View PTZ Controls Axis Media Control viewer toolbarAxis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Axis M3014 Network Camera Basic Setup Setting up the productSetting up the product Pixel Counter VideoVideo Video Stream264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings View AreaOverlay image OverlayPrivacy Mask Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Guard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M3014 Network Camera Continuous recording RecordingsRecordings Recording ListAxis M3014 Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264System Overview MaintenanceSupport Support OverviewPlain Config Reset to factory default settingsScripting File UploadChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format No images displayed on web Video and image problems, generalVideo Camera Settings Problems uploading filesChanges in luminance Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsDimensions Maintenance Installation aidsMemory Power ConnectorsPerformance considerations M1.7
Related manuals
Manual 52 pages 6.53 Kb