Axis Communications AXIS Q6000-E Storage, SD Card, Following SD card file systems are supported

Page 51

AXIS Q6000-E PTZ Network Camera

System Options

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

Note

For SD card recommendations see www.axis.com

The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use ultra-high speed SD cards (SDHC UHS-I or SDXC UHS-I). In temperatures below – 25° C use industrial grade SD card.

The following SD card file systems are supported:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — supported by most operating systems for personal computers.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under General Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under General Settings.

Mount and Unmount SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Open the Axis product’s webpages and go to Setup > System Options > Storage.

2.Click SD Card.

3.Click Unmount.

4.The card can now be removed.

Format SD Card

NOTICE

Formatting the SD card will remove all data and recordings stored on the card.

The Axis product can be configured to automatically format SD cards that are inserted into the product. If autoformat is enabled and an SD card is inserted, the product will check if the SD card has the ext4 file system. If the card has a different file system, the card will automatically be formatted to ext4.

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Axis Q6000-E PTZ Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6000-E PTZ Network Camera Table of ContentsPerformance Considerations Hardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeRestart Button LED IndicatorsSD Card Slot Control ButtonMidspan LED Indicators Green Steady when AC power input connectedColor Indication Set the Root Password Access the ProductAccess from a Browser Access from the InternetClick Use Https ConfigurationAdjust the Camera Heads Connect to the PTZ Network CameraCalibrate the PTZ Network Camera Live View Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarJoystick PTZ ControlsHow to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6000-E PTZ Network Camera Basic Setup Set Up the ProductPixel Counter Click Save to apply the new settingsVideo Video Stream264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceOverlay Overlay ImageGo to Video Video Stream and select the Image tab Use Overlay Text in an Action Rule Go to Video Overlay ImageGo to Events Action Rules Privacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsUser Defined Links Control Queue PTZ Pan Tilt ZoomShock Detection DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis Q6000-E PTZ Network Camera Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q6000-E PTZ Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersActions Recipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click AddGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesGo to Recordings List RecordingsFind Recordings Play RecordingRecording List Export Video ClipGo to Recordings Continuous Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateCalibrate the PTZ Network Camera Network Basic TCP/IP SettingsARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Mount and Unmount SD Card StorageSD Card Following SD card file systems are supportedTo add a network share MaintenanceUnder General Settings, select Autoformat to Network ShareLogs & Reports SupportSupport Overview System OverviewScripting Reset to Factory Default SettingsPlain Config AdvancedProblems setting the IP address TroubleshootingUpgrade the Firmware Symptoms, Possible Causes and Remedial ActionsBasic Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Key frames Video and image problems, generalVideo Camera Settings Storage and disk management problemsReformat the SD card and then click Mount Condensation in domeBlurred image Technical Specifications Power Function/group Specifications Event actionsInstallation aid Maintenance General CasingPerformance Considerations ConnectorsM1.26
Top Page Image Contents