Axis Communications AXIS Q6000-E LED Indicators, SD Card Slot, Control Button, Restart Button

Page 7

AXIS Q6000-E PTZ Network Camera

Hardware Overview

RJ45 Ethernet service port.

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

NOTICE

To comply with the IP66-rated design of the camera and maintain the IP66 protection, the supplied RJ45 Push-pull Connector (IP66) shall be used. Alternatively, use the RJ45 IP66-rated cable with premounted connector which is available from your Axis reseller. Do not remove the plastic network connector shield from the camera.

SD Card Slot

An SD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications .

NOTICE

•Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.

•Risk of data loss. To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Note

For SD card recommendations see www.axis.com

Control Button

For location of the control button, see Hardware Overview on page 6 .

The control button is used for:

•Resetting the product to factory default settings. See page 54.

•Connecting to an AXIS Video Hosting System service. See page 47. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 47. To connect, press and hold the button for about 3 seconds.

Restart Button

Press the restart button to restart the product.

LED Indicators

Status LED	Indication

Unlit	Connection and normal operation.

Green	Shows steady green for 10 seconds for normal operation after startup completed.

Amber	Steady during startup. Flashes during firmware upgrade.

Amber/Red	Flashes amber/red if network connection is unavailable or lost.

7

Image 7

Contents Axis Q6000-E PTZ Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6000-E PTZ Network Camera Table of ContentsPerformance Considerations Hardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeRestart Button LED IndicatorsSD Card Slot Control ButtonGreen Steady when AC power input connected Midspan LED IndicatorsColor Indication Set the Root Password Access the ProductAccess from a Browser Access from the InternetClick Use Https ConfigurationAdjust the Camera Heads Connect to the PTZ Network CameraCalibrate the PTZ Network Camera Live View Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarJoystick PTZ ControlsMedia Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6000-E PTZ Network Camera Basic Setup Set Up the ProductPixel Counter Click Save to apply the new settingsVideo Video Stream264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceOverlay Image OverlayGo to Video Video Stream and select the Image tab Go to Video Overlay Image Use Overlay Text in an Action RuleGo to Events Action Rules Privacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsUser Defined Links Control Queue PTZ Pan Tilt ZoomShock Detection DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAxis Q6000-E PTZ Network Camera Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q6000-E PTZ Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersActions Recipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click AddGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesGo to Recordings List RecordingsFind Recordings Play RecordingRecording List Export Video ClipGo to Recordings Continuous Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateCalibrate the PTZ Network Camera Network Basic TCP/IP SettingsARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Mount and Unmount SD Card StorageSD Card Following SD card file systems are supportedTo add a network share MaintenanceUnder General Settings, select Autoformat to Network ShareLogs & Reports SupportSupport Overview System OverviewScripting Reset to Factory Default SettingsPlain Config AdvancedProblems setting the IP address TroubleshootingUpgrade the Firmware Symptoms, Possible Causes and Remedial ActionsBasic Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Key frames Video and image problems, generalVideo Camera Settings Storage and disk management problemsCondensation in dome Reformat the SD card and then click MountBlurred image Technical Specifications Power Function/group Specifications Event actionsInstallation aid Maintenance General CasingPerformance Considerations ConnectorsM1.26