AXIS P1343 Network Camera
Live View Config
Browser | Viewer | Description |
|
|
|
Windows Internet Explorer | AMC | Recommended viewer in Internet Explorer (H.264/Motion JPEG) |
|
|
|
| QuickTime | H.264 |
|
|
|
| Java applet | A slower imaging alternative to AMC (Motion JPEG). Requires one of the |
|
| following installed on the client: |
|
| • JVM (J2SE) 1.4.2 or higher |
|
| • JRE (J2SE) 5.0 or higher |
|
|
|
| Still image | Displays still images only. Click the Refresh button in your browser to view a |
|
| new image |
|
|
|
Other browsers | Server Push | Recommended viewer for other browsers (Motion JPEG). |
|
|
|
| QuickTime | H.264 |
|
|
|
| Java applet | A slower imaging alternative to Server Push (Motion JPEG only). |
|
|
|
| Still image | Displays still images only. Click the Refresh button in your browser to view a |
|
| new image |
|
|
|
For more information, please see the online help .
Viewer Settings
Options for the viewer are configured under Live View Config > Viewer Settings.
•The Show viewer toolbar option will display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video image in your browser.
•H.264 decoder installation. The administrator can disable installation of the H.264 decoder included with AXIS Media Control. This is used to prevent installation of unlicensed copies. Further decoder licenses can be purchased from your Axis reseller.
•Select Show crosshair in PTZ joystick mode to enable a cross that will indicate the center of the image in PTZ joystick mode.
•Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel.
•You can enable recording from the Live View page. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC), on page 14.
User Defined Links
To display
Output Buttons
An output on the Axis product can be controlled directly from the Live View page, by enabling the display of output buttons. To display the output buttons in the Live View page, select the type of control to use for the port from the
•Pulse activates the output for a defined period of time. The pulse time can be set as short as 1/100 second, and as long as 60 seconds
•Active/Inactive displays two buttons (on/off). The output ports must first be configured under System Options> Ports & Devices > I/O Ports. See I/O Ports, on page 45.
26